Excalibur Smart Incising for Round Timbers from Timber Treatment Solutions (TTS). - 63 mm - 200 mm Diameter (1.29"-7.8") - Minimum length of 200 mm to no max (7,8" - (9) Incising Heads - Self cleaning system for blades - Allows superior preservative penetration with pressure treatment - Optional: Customized builds for larger pole requirements

Timber Treatment Solutions now offers an advanced incising solution for square sawn timbers with EXCALIBUR PRO, allowing a superior penetration of the wood in the subsequent preservative pressure treatment. It offers the ability to incise specific sections of post, saving on preservatives while still focusing the treatment where it is needed most and helping to retain visual product aesthetics above the ground contact line. - 1” x 1” to 20” x 20” Section Capacity - No maximum length - Incision depth up to 3/4" - 2 sets of 2 incising heads, fully sequenced with each other - Self cleaning system for blades - Incises all four faces in a single pass with incising pattern sides finishing at the same point - Full- or part-post straight-through continuous incising with a simple choice of the length and place of incision anywhere on the post - Mechanical blade separation system allows rapid setting of the machine for different timber sizes - Auto self-calibration to ensure accurate incising every time and reduce operator error

Krusi Krusimatic G2 Log Milling Machine - Capable of milling dovetails, lap joints, joinery, end cuts, key cuts and drill holes - Fully automated - Still installed and available for inspection

Mellot Unscrambler

Harp Series machining Center for long and narrow parts! Available in 4 or 5 axis systems. Robotic material handling options! The HARP Series, specifically designed for processing High Aspect Ratio Parts (long & narrow parts), is typically customized with Clamping Fixtures and Spindle Configurations specific to the parts being manufactured. With the ability to operate with up to four (4) independently and simultaneously controlled cutting heads, the HARP machines increase throughput of up to 10 times compared to traditional CNC machines. In the door & window industry HARP machines can be found producing over 1,600 door jambs per 8-hour shift with fully automated load/unload systems.

Simonds RMO 942 Auto Leveler 480V Excellent Condition

Good Condition Used Regularly

Good Condition Ready to Load

Timber Treatment Solutions designs and manufactures turnkey high pressure wood treatment plants for impregnating timber to Use Class 3, Use Class 4 and a variety of other requirements. These plants generally include: – - an autoclave with quick closing door(s) - one or several tanks to store the treatment chemical - a process skid, with all necessary pumps, valves, and pipes - a timber pack handling system, from completely manual to fully automated - a mixing / dosing system - a PC or HMI based control system with our latest plant operating system There are lots of possible configurations, and our teams will be able to advise the most suitable high pressure wood treatment plant for you, according to your needs and budget. Plants can be designed for any of the processes required by the timber impregnation industry: – - Bethel (full cell) – this is the most common for treatment of timber to Use Class 3 and 4 - Rueping (empty cell) – this process cycle is used for more specialist lumber treatments, such as creosote and copper oil, where the impregnation rate needs to be reduced on highly absorbent wood species - Lowry - Special cycles using any combination of vacuum, air pressure & fluid pressure phases, which can be designed on request WHEN TO USE HIGH PRESSURE IMPREGNATION High pressure treatment is widely used whenever deep impregnation of wood by a preservative required: – - Sawn or round posts using water-based copper chemicals (UC3 / UC4) - Poles, sleepers, posts using Creosote, Creosote/Oil mix, CuNap & Copper Oil - Construction timber with fire retardant chemical - For specific applications, such as resin or furfural impregnation before curing

Timber Treatment Solutions designs and manufactures turnkey low pressure wood treatment plants of any size which are suitable for use with any of the existing treatment chemicals on the market, whether they are water based or solvent based. These plants generally include: – - Autoclave or rectangular vessel with quick closing door(s) - One or several tanks to store the treatment chemical - Process skid, with all necessary pumps, valves, and pipes - Timber pack handling system, from completely manual to fully automated - Mixing / Dosing System - PC or HMI based control system with our latest plant operating system There are lots of possible configurations of low pressure plant, and our teams will be able to advise the most suitable for you, according to your needs and budget. Plants can be designed for any of the processes usually required by wood impregnation industry, such as Double Vacuum & Envelope WHEN TO USE LOW PRESSURE TREATMENT? Low pressure treatment is widely used, whenever light impregnation of wood by a preservative is required (also called surface treatment or envelope treatment): - To impregnate timber for Use Class 1, such as timbers that will remain dry (e.g. upper floor joists, truss rafters) - To impregnate timber for Use Class 2, such as timbers that are exposed to a slight risk of wetting or damp (e.g. tile battens, CLS framing) - To impregnate construction timber with fire retardant chemical

Timber Treatment Solutions impregnation plants can all be fitted with one of our automated timber handling systems. An automated wood handling and storage system is the best option for treating large volumes of timber in a short space of time due to minimising charge changeover times. This makes annual impregnation volumes of over 100,000m3 on a single plant easily achievable. The automated handling system can consist of anything from a transfer car which changes over one charge automatically to a multi-lane multi-level fully automatic system which only requires operator input once per day. Timber Treatment Solutions are the only manufacturer able to offer the patent pending multi-level timber handling and storage system, which can half or even third the building space required for an automated wood package handling system. There are lots of possible configurations and our teams will be able to advise the most suitable for you, according to your needs and budget.

Timber Treatment Solutions (TTS) manufacturers specialized timber treatment and preservation equipment. These systems are engineered to our specific customers specifications and applications. The TTS systems are turn key with installation and service available. - High Pressure Impregnation Plants - Low Pressure Impregnation Plants - Automated Material Handling Systems - Dip Tanks - Automation available - Hot Oil Treatment - Treatment Tunnels for individual lieces - Timber Incising Machines - Automation and control systems

Strapping Cart with Tools

48' Trailer Tipper Still under power Hydraulic unit and controls are kept indoors and working

Lumber tilt hoist that is ready to be shipped. Specs and dimensions coming!

Complete chip mill operation. All machinery will need to be moved from the current facility. System includes: - 29'x11' Log Deck - Emergency log Deck - 50' Log Infeed Conveyor - 57' Incline Bark Conveyor - 60' Deal Processor w/ Recycle Return Conveyor - Log Outfeed - 112' Log Recycle Conveyor - Log Outfeed - Metal Detector - Control Room - Chipper infeed - Carthage 104" 15 Pocket Chipper with 1250 HP Motor (CEM Lite Knife Hardware) - Refurbished Chipper Disc and 1250 HP Motor - Log Peel Bin - (1) 8'x16' Progress Chip Screens with 80' Chip Stacker - #1 Chip Conveyor: 500' - #2 Chip Conveyor: 1000'

This wood was all removed from an old mill on South Carolina. It is ready to be loaded out.

The seller has confirmed that this Unscrambler deck is in good working/running condition. It is ready to load! - Unscrambler deck - (8) chains

Grapple attachment as pictured

Chain deck 5 HP hydraulic power pack