Automatic template Maker for grinding your own Molder knives

15 HP 6500 CFM 10” WC

Clark 6000 lb 60” forks side shift Hard tire

Clark Lift 9' Mast Unsure of model number. Plate is worn down. Machine starts and runs.

Cleaver Brooks Boiler 500 HP 4-Pass dryback Natural Gas 60 PSI Design pressure

Cleereman Carriage PawTawJohn setworks and 3D scanner Three headblock model LPC-42 Four position dogs in/out and bottom dog turning Spare cylinders for all positions Spare top and bottom dogs 30 hp hydraulics

Cleereman Log Turner

Cleereman #36 Circular Sawmill 100 HP Electric Engine Left Hand

Comac TAG 100 Package Kiln 30'x36' Gas fired with control room Looks like 70 MBF with 4/4 lumber

Photos coming Compact DDM6 Profile Canter Line Double Length Infeed Production: 27,000 Logs/ 24 hours, 360 FPM (2x6), 500 FPM 2x4 Infeed belt conveyor V flight scanning conveyor without the scanner and optimization system One pass small log processor Outfeed belt conveyor #1 Outfeed lifting belt conveyor #2 Outfeed belt conveyor #3 Lumber landing table Motor Control Centers (MCC) Programmable Logic Controller (PLC) - obsolete

All machinery sold as a package. Just removed from production, available immediately. Scragg Mill 5 Strand Log Deck 3 Strand Log Deck (2) 40" Blowers Honey Badger Pallet Nailer 671 Detroit Diesel Wood Mizer EG400 Edger 3 Strand Log Deck 35' Green Chain 2 Strand Deck Timberland Pallet Notcher 4 Head Morgan Resaw Single Head Morgan Resaw 16' x 4' Conveyor

Complete mill ready to dismantle and move. - Precision Roster Head Debarker - Corley Sawmill & Carriage - Comac Dry Kiln

Pallet manufacturer has decided to go a different direction. All machinery will be available as a package or by individual piece! Click for individual listings: - [Baker Single Notcher](https://www.carolinamachinerysales.com/listings/4808984-used-baker-single-head-notcher) - Baker Model C 4-Head Resaw - [Brewco B1600 Grade Resaw](https://www.carolinamachinerysales.com/listings/4806400-used-brewco-b1600-grade-resaw-system ) - [Nyle PHT350 Kiln](https://www.carolinamachinerysales.com/listings/4803222-used-2023-nyle-pht350-dry-kiln) - [Pallet Chief IV with Stacker](https://www.carolinamachinerysales.com/listings/4803270-used-2023-pallet-chief-iv-pallet-nailer) - [Pneumatico Block Nailer](https://www.carolinamachinerysales.com/listings/4803246-used-2023-pneumatico-block-nailer) - [Viking Champion 304A Nailer](https://www.carolinamachinerysales.com/listings/4803252-used-2015-viking-champion-304a-nailer) - [Viking Champion 306 Nailer](https://www.carolinamachinerysales.com/listings/4805708-used-2021-viking-champion-qc306-nailer)

Complete Sawmill Operation Asset list includes: Corley 2-HB Sawmill: 200 HP, log deck Corley 8x48 Gang Edger: 24" Blades 4-Head Trim Saw 2-Head Trim Saw Gabbiani Gang Rip Saw Wood-Mizer 4-Head Resaw Bob Hanna Double Notcher Precision Chipper: 48", 100 HP Motor Pendu Stacker (2) Case Forklifts Tigercat Knuckle Boom Loader with Bucksaw Mack semi (2) Pallet Dismantlers John Deere 744 Loader with bucket and grapple Miner 2-Blade Edger Misc: Motors, hydraulic packs, decks, conveyors, rollers, gear boxes Includes: All electrical and controls

7,000 Square feet of cloth Approx 70,000 CFM (2) 37" Positive Fans: 150 and 125 HP Ready to load on your truck!

750 kw Generator This was owned by a hospital. Seller purchased both units and never used them.

Complete mill that needs to be removed from the current location. Seller will not split up the operation. (2) Infeed Decks: - (2) 3-Strand Infeed Deck 24' Long - H82 Chain - 3-7/16" Shaft - (2) 10 HP Drives - 3-Strand infeed deck 60' Long Cut Off Saw: - 54" Saw - 20 HP Motor - Hourglass rollers - Hydraulic length stops - Diverter gate to debarker Debarker - Infeed Deck - Cambio 24" Debarker - 75 HP Main motor Scragg: - 5-strand Infeed, 20' Long - Copper Scragg: 30 HP Hydraulic package, variable speed cable feed works with pantograph arm, log positioning, 48" saws with 125 HP motors, (2) 18" 2-position slab conveyors, cab, 8'-16' length capacity, max log 22", largest cant 12"x12" - Outfeed sorting system to two edgers: 5-Stand lower deck, 4-strand hydraulic lift to gang edger Gang & Board Edger: - 10" Mainland Gang Edger: 200 HP Motor, 34" inserted tooth saws with 5/16" kerf - 6" x 50" Mainland Board Edger: 150 HP motor, 24" blades, self tailing outfeed conveyor Trim Saw: - 2-Saw Trimmer with outfeed Greenchain: - Camel Back Landing Transfer - 4-Strand x 26' Long - 4-Strand: 8'4" Decline transfer - 4-Strand 66' Greenchain

Brand new System - IN STOCK! Coral FM 10 Ready Dust System 5,000 RPM 10 HP 230 or 480 V

New in the crate - Ready to ship! The ICON class dust system from Coral comes in 1-5 bag systems ranging from 1,400-3,800 CFM. - Easy installation! - Plug & Play setup - 3-10 HP Available!

In stock and ready to ship! ICON Pro Series from Coral - Integrated Fan - Easy installation - Plug and play! - 2900-3500 CFM - 5.5-7.5 HP