INGERSOLL RAND SSR-EP30SE Rotary Screw CompressorSpecifications: -- 30 HP Motor, approx. 120 CFM @ 125 PSI, totally integrated package, single stage rotary screw air end, max. modulate pressure 128 PSI; full sound enclosure keeps noise levels below 75 dBA.Features: -- "Intellisys" Microprocessor based control system, premium instrument panel, air-to-air 2-stage after-cooler, electronic stepper motor inlet air control, sealed SSR direct drive gear train, total positive lubrication system with spin-on filter.Control system includes: -- Finger touch membrane panel, LED diagnostic readout with (8) operating conditions, (12) programmable operating parameters, (4) fault warnings, and (11) fault shutdowns.(23,069) Total operating hours.

INGERSOLL RAND 5 HP Compressor, 17.1 CFM @ 90 PSI, 80-gal. Vertical Tank.Designed with: 2-Stage (2) cylinder cast iron pump, splash lubricated, inter-cooler, after-cooler, large dia. pressure gauge and air filter. -- Features: -- Ingersoll's T-30 series pump with high performance, proven design and dependable. -- Complete with: -- Tank mounted starter, automatic tank drain, heavy pressure switch, low oil switch, oil level sight-glass and fully covered belt guard; durable painted finish, service-and-operators manual. -- Also includes: -- Ingersoll-Rand refrigerated air dryer "DS35" with max. inlet temp of 140°F, Outlet Temp. 34°F - 40°F pressure dew point, 35 CFM, max. pressure PSIG 232 & 1/2" NPT air connection.

INGERSOLL RAND D144IN 85 CFM Non-Cycling Refrigerated Compressed Air DryerSpecifications: -- Cap. 85 CFM. -- Max. working pressure 203 PSI. -- Max. inlet temperature 60° C (140° F). -- Refrigerant type R-134A.Equipped with: -- Aluminum braze plate heat exchanger. -- Variable speed fan. -- Microprocessor control, with Graphic display, LED Dew point indicator, Energy saving mode, & History of last (10) alarms. -- Remote alarm signal terminal. -- High pressure switch. -- Fully-adjustable programmable electronic drain valve.

Ingersoll Rand RS37i,50hp Premium Rotary Screw Air Compressor --231 CFM, 3 Phase. --Includes Dryer(12,895) Total operating hours.

INGERSOLL-RAND UP6-15C-125 15 HP Single-Stage Horizontal Tank-Mounted Rotary Screw Air Compressor, with 2,313 Hrs. (as of 2/16/24) Specifications: Cap. 55 CFM, Max. pressure 125 PSI. Pump speed 6,250 RPM. Sound level 69 dBA. Equipped with: High efficiency close coupled air end. Motor shaft-mounted centrifugal blower. Electronic stepper motor inlet air control. 2-Stage Air-cooled aftercooler. Total positive lubrication system, with Spin-on filter. Compartmentalized sound enclosure. Complete with: 80 Gallon Cap. 24” Dia. x 33” L Horizontal Air Receiving Tank. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

INGERSOLL RAND D144IN 85 CFM Non-Cycling Refrigerated Compressed Air Dryer Specifications: Cap. 85 CFM. Max. working pressure 203 PSI. Max. inlet temperature 60° C (140° F). Refrigerant type R-134A. Equipped with: Aluminum braze plate heat exchanger. Variable speed fan. Microprocessor control, with Graphic display, LED Dew point indicator, Energy saving mode, & History of last (10) alarms. Remote alarm signal terminal. High pressure switch. Fully-adjustable programmable electronic drain valve. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

INTERNATIONAL - IB-4430-60-HD, ...Automatic Tie Horizontal BalerSpecifications: -- Bale size: 44" x 30" -- Hopper opening: 42" x 60" -- Cylinder bore: 8" -- Cylinder stroke: 82" -- Tension cylinder: 6" -- Cycle time: 15 Sec (no load) -- Ram force: 150,800 Lbs -- Main motor: 40 HPEquipped with: -- Oil cooler

INTERNATIONAL - 1295-44, ...Horizontal Closed Door BalerSpecifications: -- Cylinder: 7" -- Feed opening: 42" x 50" -- Main motor: 30 HP

INTERNATIONAL - 1295-44, ...Horizontal Closed Door BalerSpecifications: -- Cylinder: 7" -- Feed opening: 42" x 50" -- Main motor: 30 HP

INTERNATIONAL - MT-4843, ...Manual-Tie Horizontal Baler with Infeed ConveyorSpecifications: -- Cylinder: 8". -- Opening size: 60" x 46". -- Main motor: 40 HP.Equipped with: -- Control panel. -- Oil Cooler – Air-Over-Oil. -- 10' Bale Run-Out Table. -- High-Temp/Low Oil Level Shutdown. -- 48" x 43" x 60" Bale Size.

INTERNATIONAL - NA-1295HD, ...Closed Door Horizontal BalerSpecifications: -- Bale size: 72" x 44" x 36" -- Main cylinder bore: 8" -- Total force: 113,000 Lbs -- Ram face pressure: 71 PSI -- Feed opening: 42" x 50" -- Cycle time: 30 sec -- Main motor: 30 HPFeatures: -- PLC Control -- Bale table -- Shear bar -- Heavy-duty welded construction -- Heavy-duty hydraulic system -- Easy-to-operate controls

INTERNATIONAL BALER - IB-4430-50, ...Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 8". -- Ram force: 125,660 Lbs. -- (6) Tension cylinders: 4" Bore. -- Feed opening: 42" x 50". -- Main motor: 40 HP.Equipped with: -- Shear blade with adjustable striker bar. -- Regin hydraulics. -- LED Indicators for bale functions. -- Autostart electronic beam. -- Oil cooler. -- Replaceable T-1 floor.NOTE: Ram needs some repair.

IBC - NA-1296A-48: Horizontal Closed-Door Baler Model -- 50 HP Motor. -- Main Cylinder: 10″. -- Bale Size: 30″ x 45″ x 60″. -- Hopper Size: 57″ L x 45″ W. -- Platen Pressure: 134 PSI. -- System Pressure: 3,000 PSI. -- Total Force: 235,620 Lbs. -- New cylinder installed approximately (6) months ago.

IBC - "IBC 4343 X 8 – 50 - 63": Horizontal Auto-Tie Baler -- Model: AT-4343-8-50-63. -- Type: Auto-Tie Baler. -- Motor: 50 HP. -- Cylinder Bore: 8";. -- Bale Size: 43"; x 43"; x Variable. -- Manufacturing Date: 2009.

IPS - AT-752-50, ...Horizontal Auto-Tie BalerSpecifications: -- Charge box opening: 41" x 50" -- Main cylinder bore: 7" -- System pressure: 3,000 PSI -- Total force: 115,400 Lbs -- Ram face pressure: 63 PSI -- Tension cylinder bore: 6" -- Main motor: 50 HP -- Bale size: 43 x 43" x Variable length -- Bale weight: Up to 1,525 Lbs -- Bale volume: 66 Cu/Ft -- Cycle time: 20 SecFeatures: -- Hopper access door with safety interlock -- Oil Cooler

IPS - CD-751, ...Closed Door Horizontal BalerSpecifications: -- Bale size: 72" x 42" x 42" -- Main cylinder: 7" Bore -- Door cylinder: 4" Bore -- Main motor: 30 HP -- Charge hopper height: 90" -- Hopper opening: 40" x 50" -- Bale weight: Up to 1,700 Lbs -- Total force:115,400 Lbs -- Ram face pressure: 65 PSIFeatures: -- AR400 Alloy steel shear blade -- Steel floor with replaceable bearing strips -- 24 Volt control circuits -- Welded Frame, heavy reinforced channel & plate

IPS - AT-752-20, ...Horizontal Auto-Tie BalerReconditioned Baler ready to handle your recycling needs! Specifications: -- Main cylinder: 7″ -- Tension cylinder: 6″ -- Bale size: 43″ x 43″ x Variable -- Charge box opening: 41″ x 50″ -- Total force: 115,400 Lbs -- Motor: 20 HP -- System pressure: 3,000 PSI -- Ram Face pressure: 63 PSI -- Oil reservoir: 125 Gallons

IPS - AT-874-100, ...Auto-Tie Horizontal BalerSpecifications: -- Main Cylinder: 8"; Bore -- Bale size: 43" x 43" x variable -- Main motor: 100 HP -- Production capacity: up to 11 TPH (OCC) -- Bale tension cylinder: 6" -- Bale weight OCC: Up to 1,580 Lbs -- Conditioned news: Up to 1,775 Lbs -- Cycle time: 15 Sec -- Oil Reservoir Capacity: (400) gallons -- System Pressure: 3,000 PSI -- Platen Force: 150,700 lbs. -- Ram Face Pressure: 83 PSIEquipped with: -- Programmable PLC controls -- 0 - 15 Sec adjustable time delay -- Precompression lid

IPS MODEL TR-1388-100 TWO RAM HORIZONTAL BALER -- 100 HP Motor -- 13" Main cylinder -- 9" Eject cylinder -- Feed Opening 96" x 72" -- RH Eject -- Oil Heater and Cooler -- Bale release door2021 - Re lined, and rebuilt all 3 hydraulic cylinders2024 - Rebuilt 100HP motor, rebuilt 3 hydraulic pumps

IRONWOOD SLR 305 Straight Line Rip Saw Specifications: -- Width capacity of 18" and glue line tolerance up to 8'. -- Variable auto-lubrication system providing consistent lubrication to the chain track and automatically adjusting to the chain feed speed -- Minimum Material Length÷ 203 mm (8";). -- Material Thickness, Minimum- Maximum: 6.35 mm (0.25";) to 85 mm (3.35") -- Distance between Blade and Column 457 mm (18"). -- (8) Hold-down Rollers. -- Work Table Height 800 mm (31.5";). -- Saw Arbor Motor 15 HP. -- Saw Arbor Speed 4,500 RPM. -- Saw Blade Diameter 200-300 mm (8“ - 12“). -- Saw Arbor Diameter 25.4 mm (1";). -- Feed Speed 56 - 131 FPM. -- Feed Motor 2 HP.Equipped with & Features: -- Laser device to ensure straight line ripping entire length of the material. -- Maximum safety protection available with multiple rows of extended anti-kickback fingers and a side protection guard. Equipped with & Features -- (8) Accurately aligned pressure rollers extend from the cast iron machining head to provide absolute butting tolerances, low maintenance, and superior safety -- Solid steel cylindrical positioning rod and quick cam, cast iron fence provide accurate set-up, fast movement, and dust-free operations. -- Table Area (W x L) 950 mm (37";) x 1,450 mm (57";). -- Net Weight 2090 Lbs. -- Dust channel outlet (saw guard) 102 mm.