
704-841-2001
Backed with a massive machinery database considered to be “the blue book” of woodworking machinery), EX-FACTORY Auctions provides a complete assessment of your equipment and allows you to interact with the market real-time in our dynamic Online Auction!
Industry
Woodworking
1910 Results Found

704-841-2001
BALEMASTER - HD-60, ...Closed Door BalerSpecifications: -- Main motor: 20 HP -- 8" Cylinder -- Bale size 48" x 30" x 60" -- Feed opening: 57" x 35"Equipped with: -- Touchscreen controls with ALLEN BRADLEY - Micrologix, ... PLC 7" QuickPanel -- Electrical disconnect switch installed on Baler -- Ground feed oversized hopper -- Totally enclosed fan cooled (TEFC) High-Efficiency motor -- Windowed Feed Chute Door with control circuit Interrupter (Limit Switch) -- Shear Blade -- Cycling eye mounted in the frame -- Low Oil Level & Hot Oil Temperature Sensors
BALEMASTER 4025G-8 Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 8" -- Main motor: 25 HP -- Feed opening: 32" x 27" -- Bale size: 30" x 36" x VariableEquipped with: -- 5 Wire TieNOTE: Shear not included.
Call for Price
BALEMASTER 772 AO WIDE MOUTH HORIZONTAL BALER -- 25 HP motor -- Dual door cylinder -- Bale size 48" W x 26" H x 48" L -- Feed chute cross section 46" W x 48" L -- Air to Oil cooler included -- Number of bale ties 5 -- Loaded on your truck
Call for Price
BALEMASTER - 4550G-10: Auto-Tie Horizontal BalerSpecifications: --27"; x 40"; Opening. -- 50 HP. -- 10"; Cylinder. -- 30"; x 40"; x Variable Bale.
Call for Price
BALEMASTER - EO-650: Horizontal Auto-Tie Baler Specifications: • 25 HP Motor.• 8"; Main Cylinder.• Hopper Opening: 46";x 50";.• Bale Size: 48"; x 30"; x (variable).• Main Ram Face Pressure: 75 PSI.• System Pressure: 2,000 PSI.• Total Compression Force: 100,500 Lbs.
$13,750
Balestrini "PICO" Round End Tenoner:Specifications -- Left & right "twin" tilting tables (one table is always in the cutting position); 14" x 9" tables tilt 0ø - 20ø, both table fences with pin stops for indexing stile and rail doors. -- Fences swivel up to 45ø, each table with vertical pneumatic holddown; 4 HP cutter block motor, 1 HP cutter block rotation motor, 9,000 RPM spindle speed. -- Capacity: 3-15/16" (100 mm) Max. tenon length, 1-3/16" (30 mm) max. thickness, and 1-31/32" (50 mm) max. depth. - Hourly production rate of (600 - 700) tenons.
$14,375
Balestrini "MICRON" Slot Mortiser:Sprcifications -- Dual spindle system, (1) each side with tables and overhead holddown, 3 HP - 9,000 RPM spindles, (60 - 350) oscillations/Min, 18 mm collet dia. -- Capacity: 4-23/32" (120 mm) Max. length of slot, 3-1/8" (80 mm) max. slot depth, 1-3/16" (30 mm) max. slot thickness. - Hourly production rate of (500 - 800) slots.
$12,700
BALESTRINI C 70 Double Sided Feed Through Copy Shaper;Profiles various chair, table and casegood components from a prepared template. The feed through system allows curved or extremely long parts to be shaped with little or no limitation. Equipped with: -- (2) Vertical shaper spindles, 7.5 HP motor each; 30 mm dia. spindles, 8,000 RPM cutter rotation. -- Reversing rotation by switch for climb cut or conventional cut. Specifications: -- Max. working width 358 mm (14-1/8"), max. working height 118 mm (4-5/8"), min. working length 240 mm (9-1/2"); max. size of cutter blocks 90 mm x 120 mm and up to 3/8" vertical adjustment of heads. -- Part on template block is being shaped by running between spring loaded spindles with copy bearings following the template pattern. -- 1 HP variable feed motor 3 - 26 FPM, hand crank adjustable horizontal rubber infeed & outfeed holddown rollers. -- Machine has (2) 120 mm diameter dust outlets. -- Machine dimensions: 53" x 49" x 43" Machine weight: 2,310 lbs.
$12,900
BALESTRINI MINI C 2500 DOUBLE SIDED TEMPLATE PROFILE SHAPERSpecifications: -- (2) Offset shaping heads with 10 HP (7.5 kW), 230/460 volt three phase drives. (1 each side) -- Maximum reciprocating length 98" (2500 mm). -- Maximum height 7" (180 mm). -- Maximum width between spindles 8", and shaping heads are staggered for full end rounding. -- 1¼"; Diameter work arbors with 7″ under the nut capacity, and Spindle speed of 8400 RPM -- Hydraulic stroke of 9-3/4″ wide x 110″ long tee slotted work table, with feed speeds of 3 - 49 feet per minute (1-15 m/Min.) powered by 3 HP, 230/460 volt three phase hydraulic pump -- Overhead beam clamp bar with (4) adjustable clamps. -- Push button operator control station.
$90,000
--MAKE AN OFFER!---EXCELLENT CONDITION! Pair it up with a HOLZMA panel saw for true "Store & Saw" efficiency!-- BARGSTEDT PROFILINE TLF 210/15/08 INTELLISTORE Plane Storage System (Automatic Panel Storage & Retrieval System) Automatic system operations: Builds and stores stacks of panels of various material types, sizes, and thicknesses. Loads machines and builds rainbow stacks of panels. Replenishes panels between shifts and pre-sorts panels for upcoming shift. Verifies weight, size, and orientation of each panel. Records board usage and makes recommendations for future stocking levels. Increases storage capacity by eliminating transport paths. Specifications: Travel path 10,000 mm (393.70"), Range 5,000 mm (196.85"). Panel length 2,000 - 4,200 mm (78.74" - 165.35"), Panel width 800 - 2.200 mm (31.50 - 86.61"), Panel thickness 12 - 40 mm (0.47" - 1.57"), Max. panel weight 250 kg (551 Lbs.). Stacking height 2,100 mm (82.68"). Beam speed 60 MPM (196 FPM), Carriage speed 80 MPM (262 FPM), Lifting device speed 30 MPM (98 FPM). Positioning precision +/- 35 mm (1.38"). Infeed area in Current Configuration 6-1/2’ x 11’. Equipped with: "woodStore 5.0" Storage control, with 3D View, Stores all parameters, including suction, for each board. 7' H Fencing, with Walk-in door. Control Cabinet Dimensions: 78" x 31" x 90" H. NOTE: Layout has been modified and has not been integrated with a Panel Saw, Machining Center, or the like. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.
$495,000
BARKER Boiler and Fuel System built & tested in 2011 as a pilot unit. Successful testing has been completed. This surplus equipment includes the following main features: -- Combustion Temp Capability- 2,000 deg.F.; Steam Flow 24,000 lbs/hr saturated; Steam Pressure 1,500 PSI @ 600 deg. F. -- Fuel Feed rate - 3,000 Lbs/hr at 1/4" biomass (5% moisture) -- Heat Input - 7,500 btu/Lbs HHV @ 22 mmbtu/hr. -- All equipment has less than 2,500 actual operating hours since installation.EQUIPMENT MAJOR COMPONENTS: Combustor, Cyclonic combustion technology, Refractory lined Heat Recovery. Steam Generator. Rotary Drum Dryer for Fuel drying - capable of 30% moisture reduction (at the above combustion parameters) and 1.5 tons per hour (installed as used equipment).BALANCE OF PLANT FUEL FEED SYSTEM: Live-bottom bin, Bunker, Feed conveyors, Wood hog, Vibrating screen, Drag and screw conveyors. Boiler water system - feed pump,water and steam piping Emissions Control: All required baghouses (SJVUAPCD) California permitted. -- Now REDUCED PRICE from $1.5 million !!
BELFAB LW3-10 Modular Dust Collection SystemSelf-contained patented modular designed unit for interior use; Specifications: -- 10 HP, 3,600 RPM and 4,600 CFM @ 7" static pressure, standard blower. -- 12" inlet -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- 126 Sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller.Equipped with: -- (3) High Efficiency 1/8" thick needle felt cloth bags up and (3) plastic collection bags down (includes set of 24" long extended machine legs to maximize collection capacity). -- Includes: Wired Magnetic starter for 208/230/460/600 V.NOTE: The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower and inlet.
BELFAB LW4-15 Modular Dust Collector. Self-contained patented modular designed unit for interior use with direct drive 15 HP - 3,600 RPM motor, 5,000 CFM centrifugal fan assembly @ 7" static pressure, standard blower. -- 14" Inlet -- The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower, and inlet. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- Equipped with: (4) High Efficiency 1/8" thick needle felt cloth bags up and (4) Drum Adapter Kits for drum collection, 140 sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller. -- Includes: Wired Magnetic starter for 208/230/460/600 V. -- Additional options available
BELFAB LW5-20 Modular Dust Collector. Self-contained patented modular designed unit for interior use with direct drive centrifugal fan assembly @ 7" static pressure. -- The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower and 16" Inlet. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- Equipped with: (5) High Efficiency 1/8" thick needle felt cloth bags, 23.5" dia. x 64" L with 175 sq. ft. total cloth filter area and (5) Filter sleeves for 55 US-gal. drums (Not included) for collection. -- Wired Magnetic starter. -- Non-sparking Heavy-Duty cast aluminum impeller. -- 20 HP, Standard Blower with 5,000 CFM at 3,600 RPM -- Additional options and voltages available.
BELFAB NBM4-20 TILT TRUCK Modular Dust CollectorPatented Modular Technology; 6,000 CFM with a static pressure of 10"; designed for current need that can easily be upgraded, as required. -- Exterior design; each "NBM" filter module with (1) service door & (1) explosion door per NFPA 68 safety regulations, this unit has (4) filter modules.Specifications: -- Each "NBM" filter module with: (18) 7" x 60" poly twill filter tubes. -- Direct drive centrifugal fan assembly with: HUMMER 20 HP @ 1,800 RPM High Efficiency TEFC blower motor, UL & CSA approved; AMCA Class-C anti-spark blower assembly with Heavy Duty steel impeller. -- 16" In-let dia., 660 sq. ft. filter surface area. Control Panel & Shaker mechanism includes: -- (2) Interlock magnetic starters, (1) for the blower motor and (1) for the automatic shaker mechanism. -- Adjustable timer, pilot lights all pre-wired. -- Includes: (4) Heavy Duty plastic tilt trucks on rollers for disposal of waste. -- Options available, but not included are: Spark detection/fire suppression system, Fire & abort damper, 2-Way valve, Explosion vent conduit; ...please ask for quote.
BELFAB LW4-10 Modular Dust Collector. 10 HP, 3,600 RPM, 4,600 CFM centrifugal fan assembly @ 7" static pressure, standard blower. Specifications: -- Self-contained patented modular designed unit for interior use with direct drive -- The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower and 12" inlet. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- Equipped with: (4) High Efficiency 1/8" thick needle felt cloth bags up and (4) plastic collection bags down, 140 sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller. -- Includes: Wired Magnetic starter for 208/230/460/600 V. -- Additional options available.
BELFAB NBM3-15 HUMMER SERIES Dust Collector (Modular)Patented Modular Technology; 5,000 CFM with a static pressure of 10"; designed for current need that can easily be upgraded, as required. -- Interior and exterior design; each "NBM" filter module with (1) service door & (1) explosion door per NFPA safety regulations, this unit has (3) filter modules. -- Each "NBM" filter module with: (18) 7" x 60" poly twill filter tubes. -- Direct drive centrifugal fan assembly with: 15 HP @ 1,800 RPM High Efficiency "Hummer" TEFC motor, UL & CSA approved; AMCA Class-C anti-spark blower assembly with Heavy Duty steel impeller. -- 14" Inlet dia. and 17" outlet dia., 495 sq/ft filter surface area. -- Control Panel & Shaker mechanism includes: (2) Interlock magnetic starters, (1) for the blower motor and (1) for the automatic shaker mechanism, all pre-wired. -- Unit comes with: (3) Heavy Duty plastic tilt trucks, rollers for disposal of waste & adaptors. -- Options available, but not included are: Spark detection/fire suppression system, Fire & abort damper, 2-Way valve, Explosion vent conduit; ...please ask for quote.
BELFAB NBM7-30 TILT-TRUCK DUST COLLECTOR with Patented Modular Technology: Patented Modular Technology allows it to be purchased for current needs and easily upgraded as required; designed exterior use. Specification: -- Each "NBM" filter module is fitted with: (1) Service door & (2) explosion doors per NFPA safety regulations -- Rated Capacity: Rated @ 9,000 CFM with 9.5" static pressure -- Equipped with: Direct drive centrifugal fan assembly with 30 HP Hummer blower motor, anti-spark cast aluminum impeller, 20" inlet diameter.Unit includes: -- (1) Electrical Control Panel for (2) motors. (1) Soft Start starter for the main blower, (1) for the Auto Shaker -- (7) NBM filter modules, each with (18) 7" x 60" poly-twill cloth filter tubes, 990 sq./ft. total cloth. -- (60) Cu./ft. waste storage cap. via (7) Heavy Duty plastic Tilt-Trucks w/rollers; each with air-tight quick coupling plate.Options:Security System for Air Return (Included); -- (1) 20" Explosion Back Draft Damper, VIGIFLAP with dust sensor system integrated & control panel - ATEX CERTIFIED, -- (1) 24" Fire Damper with status signal. -- (1) 24" Derivation Tee. -- (1) 24" Diameter Abort Damper. -- (1) Single Zone Spark Detector, 38" max, (2) detectors, (1) sprinkler.
Call for Price
BELFAB NBM6-30 CHIP & DUST TRANSFER DUST COLLECTOR Patented Modular Technology and heavy-duty construction for exterior use. Heavy Duty construction designed for interior or exterior use.Specifications: -- Each "NBM" filter module is fitted with; (1) service door & (1) explosion door per NFPA safety regulations, and integrated compact hopper. -- Rated Capacity: Rated @ 9,000 CFM @ 9.5" static pressure, 7,600 CFM @ 10.4 static pressure. -- Equipped with: Direct drive centrifugal fan assembly with 30 HP "Hummer" blower motor, anti-spark cast aluminum impeller, 20" inlet diameter. Unit Includes: -- (6) "NBM" filter modules, each with (18) 7" x 60" Poly Twill cloth filter tubes; 990 sq. ft. total cloth area (165 sq. ft. per module) w/Continuous Dust Disposal Capacity. -- Pneumatic Chip / Dust Transfer System with (1) 7.5 HP and (1) 5 HP material handling blowers, continuously discharges chips and dust for re-cycling or disposal. -- (1) Electrical Control Panel w/ Shaker Mechanism to include; (4) Interlock Starters; (1) Soft start for the main blower, (2) for the Pneumatic Dust Transfer System and (1) for the shaker mechanism.Security System for Air Return: -- (1) 20" Explosion Back Draft Damper, (1) 24" Fire Damper with status signal, (1) 24" Derivation Tee, (1) 24" Abort Damper and (1) Single Zone Spark Detector. (Optional; pricing upon request)CALL FOR PRICING
BELFAB LW3-7.5 Modular Dust Collection SystemSelf-contained patented modular designed unit for interior use with 7.5 HP, 3,600 RPM and 3,500 CFM @ 7" static pressure, standard blower. -- The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower and inlet. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- Equipped with: (3) High Efficiency 1/8" thick needle felt cloth bags up and (3) plastic collection bags down, 126 sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller. -- Includes: Wired Magnetic starter for 208/230/460/600 V -- Additional options available.