This machine is in good working condition and can be inspected under power. Specs (to be confirmed): - Electric spindle 18.1 HP - X-axis stroke 145.66î - Y-axis stroke 82.67î - Z-axis strke 13î - Working area 145.66î x 68.90î - Automatic tilting head - Telescoping spindle extension for surface polishing - (26) ISO 40 tool holders at rear - Bar code reader for program interface

Intermac Genius 37 LS-MT Glass Cutting Line

Motoman Robot Refurbished a few years ago. In good working condition.

These are available on a monthly basis: 49” x 22” x ½” Grade: CCX Species: Douglas Fir 34 units available 140 sheets per unit Approx 5,000 sheets per month available

Decorative Curbmaking model 225

Deuma RF/S150 A-V

2004 Sennebogen 835 recently refurbished

Liebherr L 564 Loader as pictured

Liebherr L 564 Loader as pictured

Top And Bottom Scoring: 4hp Trim/Hog: 10hp Top And Bottom Tenons: 10hp Coping Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Coping Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Sand/Cope Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Sand/Cope Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Variable Speed Feed (16 To 96 Fpm): 6hp Max Working Width: 800 Mm Min Working Width: 170 Mm Min Working Width With One Chain: 55 Mm Max Working Height: 100 Mm Equipped With: “Mobile 10” Touchscreen Screen, Utilizes Encoders For Reference On Where To Position All Units In The X And Y Axis Manual Digital Counters For Tilting Mahros Return Conveyor

Top And Bottom Scoring: 4hp Trim/Hog: 10hp Top And Bottom Tenons: 10hp Coping Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Coping Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Sand/Cope Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Sand/Cope Unit With 40 Mm Spindle (6-3/4? Under Nut): 8.5hp Variable Speed Feed (16 To 96 Fpm): 6hp Max Working Width: 800 Mm Min Working Width: 170 Mm Min Working Width With One Chain: 55 Mm Max Working Height: 100 Mm Equipped With: “Mobile 10” Touchscreen Screen, Utilizes Encoders For Reference On Where To Position All Units In The X And Y Axis Manual Digital Counters For Tilting Mahros Return Conveyor

60” x 96” table Vertical Linear Motion option 460 volt 3phase includes 5’ x 5’ 10,000# capacity scale as seen on table Approx 20 hours on machine

JLG 1930 ES New Batteries Working height7.72 mPlatform length0.76 m Platform width1.87 mTransport length1.87 m Transport width0.76 m Transport height1.52 m Weight1550 kgNet load230 kg Persons2 Travel speed 4.8 km/h Turning radius outside1.75 mmax. climbing ability25 % Platform extension0,9 m Power sourceEEngine manuf.Kohler Engine typeKDI 2504Engine power48 kWMax. torque305/1500 NmNo. of cylinders4

JLG 1930 ES New Batteries Working height7.72 mPlatform length0.76 m Platform width1.87 mTransport length1.87 m Transport width0.76 m Transport height1.52 m Weight1550 kgNet load230 kg Persons2 Travel speed 4.8 km/h Turning radius outside1.75 mmax. climbing ability25 % Platform extension0,9 m Power sourceEEngine manuf.Kohler Engine typeKDI 2504Engine power48 kWMax. torque305/1500 NmNo. of cylinders4

HEESEMANN LSM-8/3-OSR Wide Belt Finishing Sander 52" and (3) Heads; Equipped with: (1) longitudinal segmented platen head. and (2) Orbital Platens Machine equipped with HEESEMANN's patented "CSD" selective pressure adjustment system, sensors placed every 16 mm (5/8") The computer control will hold a maximum of (20) programs. 1st Head: Longitudinal segmented platen head. - Segmented Polishing Platen, 20 & 27 HP dual speed motor. - Electronically controlled segments to conform to panel size - 2620 x 1350 mm (91.4 x 53.2") Sanding belt. 2nd & 3rd Heads: OSR Dual orbital action head with - (1) high-speed orbit on sanding pad, powered by 3 kW (4.5 HP) motor. - Secondary oscillation movement of platens powered by 1.5 HP motor. Upstream and downstream vacuum chutes on each head for dust localized dust pickup. - Platens feature "quick change" abrasive material; Both orbital heads with variable speed inverter drives. - Out feed Rotary Brush with cleaning brush loading with single end adjustment , 6" max. dia., 3.4 HP motor. - Variable feed speed from 13 to 82 FPM, 6.5 HP feed drive. - In feed and out feed Scissor Lift and Control box shown are not included. - Motorized thickness opening 1/4" to 3-5/32" max. - - Power Consumption: 63 KW, 75 Amps. - Separate display console for CSD control.

Can process short & long stems or cants in one pass into pallet boards, dimensional lumber, cants/timbers LogRippers have 2 chipping cutter heads which eliminate 2 side slabs Power Requirement: ~3 phase, 380V, 50Hz or ~3 phase, 460V, 60Hz. Can work in 3 modes: -Rip-Saw / Cant-Saw -Horizontal Multi-Saw -Slab Processor

Can process short & long stems or cants in one pass into pallet boards, dimensional lumber, cants/timbers LogRippers have 2 chipping cutter heads which eliminate 2 side slabs Power Requirement: ~3 phase, 380V, 50Hz or ~3 phase, 460V, 60Hz. Can work in 3 modes: -Rip-Saw / Cant-Saw -Horizontal Multi-Saw -Slab Processor

• 1 CROSS SANDING -- BELT DIM 6,600MM X150MM • SANDING SPEEDS 12 and 24 M /sec. • DRIVE POWER 15KW. • 3 LONGITUDINAL SANDING BELTS UNITS • BELT DIM----- 3250MM X 1650MM • SANDING SPEED 10 and 20 M /sec • DRIVE POWER 15KW PRESSURE BEAM WITH COMPUTER CONTROLLED SELECTIVE PRESSURE REGULATION SYSTEM. WITH INFINITE PRESSURE MATCHING OF INDIVIDUAL PRESSURE ELEMENTS FOR OPTIONAL MULTI TRACK FEEDING. 16MM CONTROL ROLLER SPACING , WORK PIECE TOLERANCE COMPENSATION UP TO A MIN. OF 2MM. THE CORRECT POINT IN TIME FOR THE DEPLOYMENT OF THE PRESSURE BARS IS DETERMINED AUTOMATICALLY BY AN ELECTRONIC LINE CONTROL IN DEPENDENCE OF THE FEED SPEED. Air dryer BRUSH CLEANING "EA2" UNIT CENTRALLY ADJUSTABLE IN HEIGHT INCLUDING EXHAUST HOOD AND PRESS ON ROLL. • DIAMETER----------------------------------------------- 220MM • DRIVE POWER---------------------------------------- 2.2KW • BRISTLE TRIMMING -------------------------------- FIBRE • VOLTS---------------------------------------------------- 400V-- 50 C/S

• 1 CROSS SANDING -- BELT DIM 6,600MM X150MM • SANDING SPEEDS 12 and 24 M /sec. • DRIVE POWER 15KW. • 3 LONGITUDINAL SANDING BELTS UNITS • BELT DIM----- 3250MM X 1650MM • SANDING SPEED 10 and 20 M /sec • DRIVE POWER 15KW PRESSURE BEAM WITH COMPUTER CONTROLLED SELECTIVE PRESSURE REGULATION SYSTEM. WITH INFINITE PRESSURE MATCHING OF INDIVIDUAL PRESSURE ELEMENTS FOR OPTIONAL MULTI TRACK FEEDING. 16MM CONTROL ROLLER SPACING , WORK PIECE TOLERANCE COMPENSATION UP TO A MIN. OF 2MM. THE CORRECT POINT IN TIME FOR THE DEPLOYMENT OF THE PRESSURE BARS IS DETERMINED AUTOMATICALLY BY AN ELECTRONIC LINE CONTROL IN DEPENDENCE OF THE FEED SPEED. Air dryer BRUSH CLEANING "EA2" UNIT CENTRALLY ADJUSTABLE IN HEIGHT INCLUDING EXHAUST HOOD AND PRESS ON ROLL. • DIAMETER----------------------------------------------- 220MM • DRIVE POWER---------------------------------------- 2.2KW • BRISTLE TRIMMING -------------------------------- FIBRE • VOLTS---------------------------------------------------- 400V-- 50 C/S

Tilt Hoist