BALEMASTER 772 AO WIDE MOUTH HORIZONTAL BALER -- 25 HP motor -- Dual door cylinder -- Bale size 48" W x 26" H x 48" L -- Feed chute cross section 46" W x 48" L -- Air to Oil cooler included -- Number of bale ties 5 -- Loaded on your truck

BALEMASTER - EO-650: Horizontal Auto-Tie Baler Specifications: • 25 HP Motor.• 8"; Main Cylinder.• Hopper Opening: 46";x 50";.• Bale Size: 48"; x 30"; x (variable).• Main Ram Face Pressure: 75 PSI.• System Pressure: 2,000 PSI.• Total Compression Force: 100,500 Lbs.

BALEMASTER - 4550G-10: Auto-Tie Horizontal BalerSpecifications: --27"; x 40"; Opening. -- 50 HP. -- 10"; Cylinder. -- 30"; x 40"; x Variable Bale.

BALEMASTER 4025G-8 Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 8" -- Main motor: 25 HP -- Feed opening: 32" x 27" -- Bale size: 30" x 36" x VariableEquipped with: -- 5 Wire TieNOTE: Shear not included.

BALEMASTER E-1290 Auto-Tie Horizontal Baler with AMERISHRED AMS-7500 Shredder/Conveyor/TipperBaler Specifications: -- Cylinder: 10" -- Bale size: 36" x 40" x variable -- Motor: 75 HPShredder Specifications: -- Cut: 5/8" -- Motor: 75 HPSystem equipped with: -- Enduraveyor Baler Feed Conveyor -- Discharge Conveyor -- Metering Feed Conveyor -- Cart Tipper

BALEMASTER - 760AO, ...Horizontal Closed Door BalerSpecifications: -- Cylinders: (2) 6" -- Feed opening: 60" x 40" -- Bale size: 48" x 72" x 34" -- Main motor: 25 HPEquipped with: -- (4) Wire single-loop bale ties -- Heat exchanger -- Photo-eyeNote: Dog ear springs need to be replaced and a small leak by the motor; otherwise, in great condition.

BALEMASTER - 48 X 72, ...Horizontal Closed Door Baler -- Designed for baling of whole or flattened corrugated boxes. -- Large feed opening to accommodate feed of larger material. -- Large 48" x 36" x 72" bale; weighs up to 1,700 pounds. -- Perfect for a Qarehouse application. -- 25 HP Moroe

BALEMASTER - HD-60, ...Closed Door BalerSpecifications: -- Main motor: 20 HP -- 8" Cylinder -- Bale size 48" x 30" x 60" -- Feed opening: 57" x 35"Equipped with: -- Touchscreen controls with ALLEN BRADLEY - Micrologix, ... PLC 7" QuickPanel -- Electrical disconnect switch installed on Baler -- Ground feed oversized hopper -- Totally enclosed fan cooled (TEFC) High-Efficiency motor -- Windowed Feed Chute Door with control circuit Interrupter (Limit Switch) -- Shear Blade -- Cycling eye mounted in the frame -- Low Oil Level & Hot Oil Temperature Sensors

Balestrini "PICO" Round End Tenoner:Specifications -- Left & right "twin" tilting tables (one table is always in the cutting position); 14" x 9" tables tilt 0ø - 20ø, both table fences with pin stops for indexing stile and rail doors. -- Fences swivel up to 45ø, each table with vertical pneumatic holddown; 4 HP cutter block motor, 1 HP cutter block rotation motor, 9,000 RPM spindle speed. -- Capacity: 3-15/16" (100 mm) Max. tenon length, 1-3/16" (30 mm) max. thickness, and 1-31/32" (50 mm) max. depth. - Hourly production rate of (600 - 700) tenons.

Balestrini "MICRON" Slot Mortiser:Sprcifications -- Dual spindle system, (1) each side with tables and overhead holddown, 3 HP - 9,000 RPM spindles, (60 - 350) oscillations/Min, 18 mm collet dia. -- Capacity: 4-23/32" (120 mm) Max. length of slot, 3-1/8" (80 mm) max. slot depth, 1-3/16" (30 mm) max. slot thickness. - Hourly production rate of (500 - 800) slots.

BALESTRINI C 70 Double Sided Feed Through Copy Shaper;Profiles various chair, table and casegood components from a prepared template. The feed through system allows curved or extremely long parts to be shaped with little or no limitation. Equipped with: -- (2) Vertical shaper spindles, 7.5 HP motor each; 30 mm dia. spindles, 8,000 RPM cutter rotation. -- Reversing rotation by switch for climb cut or conventional cut. Specifications: -- Max. working width 358 mm (14-1/8"), max. working height 118 mm (4-5/8"), min. working length 240 mm (9-1/2"); max. size of cutter blocks 90 mm x 120 mm and up to 3/8" vertical adjustment of heads. -- Part on template block is being shaped by running between spring loaded spindles with copy bearings following the template pattern. -- 1 HP variable feed motor 3 - 26 FPM, hand crank adjustable horizontal rubber infeed & outfeed holddown rollers. -- Machine has (2) 120 mm diameter dust outlets. -- Machine dimensions: 53" x 49" x 43" Machine weight: 2,310 lbs.

BALESTRINI MINI C 2500 DOUBLE SIDED TEMPLATE PROFILE SHAPERSpecifications: -- (2) Offset shaping heads with 10 HP (7.5 kW), 230/460 volt three phase drives. (1 each side) -- Maximum reciprocating length 98" (2500 mm). -- Maximum height 7" (180 mm). -- Maximum width between spindles 8", and shaping heads are staggered for full end rounding. -- 1¼"; Diameter work arbors with 7″ under the nut capacity, and Spindle speed of 8400 RPM -- Hydraulic stroke of 9-3/4″ wide x 110″ long tee slotted work table, with feed speeds of 3 - 49 feet per minute (1-15 m/Min.) powered by 3 HP, 230/460 volt three phase hydraulic pump -- Overhead beam clamp bar with (4) adjustable clamps. -- Push button operator control station.

BALESTRINI 2 CAP Mortiser --Automatically mortises or bores round holes in chairs or case good --Specifications -- Twin tables with pneumatic holddown clamps, (1) on each side eliminating dead cycle time, 19" long tables tilt left or right 0ø to 20ø. --Equipped with & Features -- 3 HP - 9,000 RPM Spindle motor and 1 HP oscillation motor. -- Spindles are mounted on prismatic guides with adjustable bronze gibs and move by rack & pinion, -- (120) to (240) oscillations/Min; 4-23/32" max. oscillation length, -- 3-1/8" max. depth, 7/8" max. bit dia., 13 mm spindle collet dia.

--MAKE AN OFFER!---EXCELLENT CONDITION! Pair it up with a HOLZMA panel saw for true "Store & Saw" efficiency!-- BARGSTEDT PROFILINE TLF 210/15/08 INTELLISTORE Plane Storage System (Automatic Panel Storage & Retrieval System) Automatic system operations: Builds and stores stacks of panels of various material types, sizes, and thicknesses. Loads machines and builds rainbow stacks of panels. Replenishes panels between shifts and pre-sorts panels for upcoming shift. Verifies weight, size, and orientation of each panel. Records board usage and makes recommendations for future stocking levels. Increases storage capacity by eliminating transport paths. Specifications: Travel path 10,000 mm (393.70"), Range 5,000 mm (196.85"). Panel length 2,000 - 4,200 mm (78.74" - 165.35"), Panel width 800 - 2.200 mm (31.50 - 86.61"), Panel thickness 12 - 40 mm (0.47" - 1.57"), Max. panel weight 250 kg (551 Lbs.). Stacking height 2,100 mm (82.68"). Beam speed 60 MPM (196 FPM), Carriage speed 80 MPM (262 FPM), Lifting device speed 30 MPM (98 FPM). Positioning precision +/- 35 mm (1.38"). Infeed area in Current Configuration 6-1/2’ x 11’. Equipped with: "woodStore 5.0" Storage control, with 3D View, Stores all parameters, including suction, for each board. 7' H Fencing, with Walk-in door. Control Cabinet Dimensions: 78" x 31" x 90" H. NOTE: Layout has been modified and has not been integrated with a Panel Saw, Machining Center, or the like. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

BARKER Boiler and Fuel System built & tested in 2011 as a pilot unit. Successful testing has been completed. This surplus equipment includes the following main features: -- Combustion Temp Capability- 2,000 deg.F.; Steam Flow 24,000 lbs/hr saturated; Steam Pressure 1,500 PSI @ 600 deg. F. -- Fuel Feed rate - 3,000 Lbs/hr at 1/4" biomass (5% moisture) -- Heat Input - 7,500 btu/Lbs HHV @ 22 mmbtu/hr. -- All equipment has less than 2,500 actual operating hours since installation.EQUIPMENT MAJOR COMPONENTS: Combustor, Cyclonic combustion technology, Refractory lined Heat Recovery. Steam Generator. Rotary Drum Dryer for Fuel drying - capable of 30% moisture reduction (at the above combustion parameters) and 1.5 tons per hour (installed as used equipment).BALANCE OF PLANT FUEL FEED SYSTEM: Live-bottom bin, Bunker, Feed conveyors, Wood hog, Vibrating screen, Drag and screw conveyors. Boiler water system - feed pump,water and steam piping Emissions Control: All required baghouses (SJVUAPCD) California permitted. -- Now REDUCED PRICE from $1.5 million !!

BELFAB NBM5-25 TILT TRUCK Modular Dust CollectorPatented Modular Technology; 7,500 CFM with a static pressure of 10"; designed for current need that can easily be upgraded, as required. -- Exterior design; each "NBM" filter module with (1) service door & (1) explosion door per NFPA 68 safety regulations, this unit has (5) filter modules.Specifications: -- Each "NBM" filter module with: (18) 7" x 60" poly twill filter tubes. -- Direct drive centrifugal fan assembly with: HUMMER 25 HP @ 1,800 RPM High Efficiency TEFC blower motor, UL & CSA approved; AMCA Class-C anti-spark blower assembly with Heavy Duty steel impeller. -- 18" In-let dia., 660 sq. ft. filter surface area. Control Panel & Shaker mechanism includes: -- (2) Interlock magnetic starters, (1) for the blower motor and (1) for the automatic shaker mechanism. -- Adjustable timer, pilot lights all pre-wired. -- Includes: (5) Heavy Duty plastic tilt trucks on rollers for disposal of waste. -- Options available, but not included are: Spark detection/fire suppression system, Fire & abort damper, 2-Way valve, Explosion vent conduit; ...please ask for quote.CALL FOR PRICING

BELFAB LW6-15 Modular Dust CollectorSelf-contained patented modular designed unit for interior use with direct drive 15 HP - 3,600 RPM motor, 5,000 CFM centrifugal fan assembly @ 7" static pressure, standard blower. -- 14" Inlet -- The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower, and inlet. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- Equipped with: (6) High Efficiency 1/8" thick needle felt cloth bags up, 210 sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller. -- Includes: Wired Magnetic starter for 208/230/460/600 V. -- Additional options available

BELFAB LW6-15 Modular Dust Collector (HUMMER)Self-contained patented modular designed unit for interior use with direct drive 15 HP - 1,800 RPM motor, 5,000 CFM "HUMMER" centrifugal fan assembly @ 7" static pressure, standard blower. -- 14" Inlet -- The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower, and inlet. -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- Equipped with: (6) High Efficiency 1/8" thick needle felt cloth bags up, 210 sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller. -- Includes: Wired Magnetic starter for 208/230/460/600 V. -- Additional options available

BELFAB RPJ26-121 Pulse Jet Dust Collector with Rotary Air Lock and Transfer Fan.Specifications: -- 15,285 CFM approx. baghouse dust collector with (121) filter bags at 10-feet long with metal cages. Total of 1,884 sq. ft of cloth area. -- Filter Cleaning: Reverse Pulse Jet (RPJ) via plant compressed air that is sequenced by diaphragm valves/solenoids/manifold thru to a Venturi that injects a burst of air pressure to dislodge the dust build up on the outside of filter bags. This is a continuous process during the operation of the dust collector. (no shut down is needed). -- Main Fan: 75 HP side-mounted blower motor. with approx 26" dia. inlet. Rated at approx 15,000 CFM @ 15" SP. -- Comes with: Main starter with control panel. -- System includes: Relay/Transfer fan, steel structure support stand, low height as waste is transferred by fan, safety ladder/platform, safety railing, and approx. 20" Rotary Air Lock. -- Housing is about 8'-5" square by about 23' high overall. Weight with structure is about 8,600 Lbs. Note: Round cone section with storage capacity of about 246 cu ft may not be included. in above height and weight. -- Available in May 2025.

BELFAB LW3-10 Modular Dust Collection SystemSelf-contained patented modular designed unit for interior use; Specifications: -- 10 HP, 3,600 RPM and 4,600 CFM @ 7" static pressure, standard blower. -- 12" inlet -- Heavy Duty sheet metal constructed plenum between the top bags and bottom dust collection. -- 126 Sq. ft. total cloth filter area. Non-sparking Heavy-Duty cast aluminum impeller.Equipped with: -- (3) High Efficiency 1/8" thick needle felt cloth bags up and (3) plastic collection bags down (includes set of 24" long extended machine legs to maximize collection capacity). -- Includes: Wired Magnetic starter for 208/230/460/600 V.NOTE: The "LW" series can be specifically customized for current and future Dust Collection requirements as required by adding Filter Modules, a larger blower and inlet.