Air Compressors For Sale

Filtering

Reset All 

thru
 Used     New
Viewing Page 3 of 5
95 Results Found
Sort By 
$ 5,100

Ingersoll-Rand screw compressor, 50 hp electric power, approx 225 CFM, good operating condition

Showcase Equipment
260-250-4645
Call

$

IR 10 HP Compressor

Carolina Machinery Sales, Inc
704-288-1904
Call

$

10 HP add on storage tank as pictured 230/460 3 phase

Carolina Machinery Sales, Inc
704-288-1904
Call

$

Ingersoll-Rand 30hp 200 gallon Air Compressor, horizontal tank.

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 3,500

INGERSOLL RAND 5 HP Compressor, 17.1 CFM @ 90 PSI, 80-gal. Vertical Tank.Designed with: 2-Stage (2) cylinder cast iron pump, splash lubricated, inter-cooler, after-cooler, large dia. pressure gauge and air filter. -- Features: -- Ingersoll's T-30 series pump with high performance, proven design and dependable. -- Complete with: -- Tank mounted starter, automatic tank drain, heavy pressure switch, low oil switch, oil level sight-glass and fully covered belt guard; durable painted finish, service-and-operators manual. -- Also includes: -- Ingersoll-Rand refrigerated air dryer "DS35" with max. inlet temp of 140°F, Outlet Temp. 34°F - 40°F pressure dew point, 35 CFM, max. pressure PSIG 232 & 1/2" NPT air connection.

Jim Reedy
800-374-5009 ext:455
Call

$

Ingersoll-Rand 200HP Screw Compressor

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$

INGERSOLL-RAND UP6-15C-125 15 HP Single-Stage Horizontal Tank-Mounted Rotary Screw Air Compressor, with 2,313 Hrs. (as of 2/16/24)Specifications: -- Cap. 55 CFM, Max. pressure 125 PSI. -- Pump speed 6,250 RPM. -- Sound level 69 dBA. Equipped with: -- High efficiency close coupled air end. -- Motor shaft-mounted centrifugal blower. -- Electronic stepper motor inlet air control. -- 2-Stage Air-cooled aftercooler. -- Total positive lubrication system, with Spin-on filter. -- Compartmentalized sound enclosure.Complete with: -- 80 Gallon Cap. 24"; Dia. x 33"; L Horizontal Air Receiving Tank.

Jim Reedy
800-374-5009 ext:455
Call

$

Ingersol-Rand Mdl TM600-TE4 Air Dryer

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$

Ingersoll Rand TZ220 heatless regenerative air dryer s/n 6211

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$

Ingersoll-Rand SS3, Vertical Mount, Contractor Series, Air Compressor

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 10,000

Ingersoll Rand SSR II 50 HP screw type air compressor, believed to have 20,000 hours, Ingersoll Rand Model TS2A dryer 150 PSI Max refrigerant dryer (ref #174), 460V 3 phase, Approximate 220 CFM, Call Rachel for more information 931-797-6284

 Centerville, TN
Kittrell Sawmill Brokers and Appraisers
931-797-6284
Call

$

Ingersol-Rand SSR-2000 80HP Air Compressor

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 7,750

INGERSOLL RAND SSR-EP30SE Rotary Screw CompressorSpecifications: -- 30 HP Motor, approx. 120 CFM @ 125 PSI, totally integrated package, single stage rotary screw air end, max. modulate pressure 128 PSI; full sound enclosure keeps noise levels below 75 dBA.Features: -- "Intellisys" Microprocessor based control system, premium instrument panel, air-to-air 2-stage after-cooler, electronic stepper motor inlet air control, sealed SSR direct drive gear train, total positive lubrication system with spin-on filter.Control system includes: -- Finger touch membrane panel, LED diagnostic readout with (8) operating conditions, (12) programmable operating parameters, (4) fault warnings, and (11) fault shutdowns.(23,069) Total operating hours.

Jim Reedy
800-374-5009 ext:455
Call

$

Joy 290 Compressor with just over 100 hours!

Carolina Machinery Sales, Inc
704-288-1904
Call

$

KAESER - ASD 40 T, ...40 HP Rotary Screw Air Compressor, with Integrated Dryer & 17,702 Run & 3,775 Load Hrs (as of 2/16/24)Specifications: -- Rated capacity: 191 CFM. -- Max. pressure: 125 PSIG. Equipped with: -- 40 HP - 3,570 RPM TEFC Direct drive motor; IE3 (Premium Efficiency). -- "SIGMA PROFILE" Air end. -- 1:1 Motor-air end coupling. -- Wye-Delta reduced voltage magnetic starter. -- Electronic Thermo-Management (ETM) system. -- 2-Stage 4 micron air intake filter with Cyclone pre-separation & replaceable element. -- Safety pressure relief valve. -- Anti-vibration mounts. -- Sound enclosure. -- KAESER "SIGMA CONTROL 2" PC-Based controller with LCD Display & Touchpad.Complete with: -- Integrated Refrigerated Dryer. -- Compressor Operator Manual & Controller User Manual.Dimensions for this Specific Machine: 70" x 36" x 61" H.Weight for this Specific Machine: 750 kG (1,650 Lbs).

Jim Reedy
800-374-5009 ext:455
Call

$ 950

KAESER KCF 200 Oil/Water SeparatorSpecifications: -- Cap. for Screw Compressors: 900 SCFM for Mineral/Turbine oil (Additive free), 600 SCFM for Diesters PAO, & 450 SCFM for Polyglycol. -- Cap. for Piston Compressors: 600 SCFM for Mineral/Turbine oil (Additive free), 450 SCFM for Synthetic oil. -- Filling volume 19.2 Gallons. -- Max. operating pressure 232 PSIG.Equipped with: -- 30.5 Gallon Container. -- 4.9 Gallon Pre-filter, 5.4 Gallon Main filter.

Jim Reedy
800-374-5009 ext:455
Call

$

Kaeser CS76 Dual Air Compressor

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$

LeRoi CL 50 Cub Screw Compressor

 Clarksburg, TN
LPS Equipment & Acquisition Co.
731-986-4351
Call

$ 19,547

MATTEI BLADE 11 LX-TM-SE, 15 HP Tank-Mounted Rotary Vane Compressor w/Refrigerated Air Dryer (65 CFM @ 115 PSIG).RELIABLE ROTARY VANE AIRENDSBLADE features proprietary single-rotor stator unit (RSU) that incorporates MATTEI's legendary white metal Babbitt bushings on the back and now an oversized radial ball bearing on the front to address the side load created by the belts. MATTEI BLADE compressors are engineered for 24 hours/day service with "exclusive Meehanite® iron blades", designed to last 100,000 hours.Features: -- MATTEI "BLADE Series" Air Compressors combine vane technology with dual "V" belt transmission to provide industry leading performance at affordable prices. -- As quiet as 61 dB(A), with speeds as low as 1,050 RPM, and operating pressures from 115 PSI to 175 PSI, BLADE is the ideal solution for small woodworking cabinet shops and manufacturers, body shops, mechanical shops, and other manufacturers.Equipped with: -- 15 HP TEFC motor, 65 CFM @ 115 PSIG; full-voltage motor starter. -- Air-cooled Aftercooler, MAESTRO XB controller with Continuous and Automatic operating modes with standard load/unload operation on all models. -- MATTEI Rotor Oil 8000 F2 synthetic oil.Includes: -- 120-Gallon ASME Air Receiver Tank. -- Refrigerated Air Dryer. -- Pressure Gauge, Safety Valve, Filter and Oil Separator.

Jim Reedy
800-374-5009 ext:455
Call

$ 22,533

MATTEI BLADE 18 LX, 25 HP Direct-Drive Rotary Vane Compressor (112 CFM @ 116 PSIG)Direct-Drive Air Compressors combine legendary vane technology with traditional shaft-to-shaft coupling to provide industry leading performance at affordable prices. As quiet as 66 dB(A), all models turn at a slow 1,800 RPM. -- Equipped with: 25 HP Premium efficient TEFC motor; Wye-delta starter; quiet acoustic enclosure, 67 dB(A); air-cooled after cooler; protection system MaestroXS. -- Features: MAESTRO XB controller with expansion module allowing real time clock and daily/weekly programming, Continuous and Automatic operating modes with standard load/unload operation on all models, moisture separator & zero-loss electronic condensate drain (shipped loose); phase reversal protection; network ready. -- Includes: (3) Year parts warranty, (10) years on Air-End. Add Optional Refrigerated Air Dryer AC-300295

Jim Reedy
800-374-5009 ext:455
Call

Contact Us
  • Toll Free & Canada: (800) 477-7606
  • Direct & International: (931)381-1638
  • Location: 2508 Pillow Dr. Columbia, TN 38401
Copyright © 2020 LumbermenOnline.com - All Rights Reserved