BioMass Equipment For Sale

In good condition. Has 50” opening. No drive motor but would take 100-200HP depending on material being run. No screen included. Very heavy weighs approximately 4 ton.

Mobark 1400 Tub Grinder, used for municipal waste only, in very good condition, turn key operation. $120,000

1998 Morbark 1300 Tub Grinder -9000 hours meter doesnt work but has original ecm can read it -Loader -Few minor leaks -Mill in great shape -Augers are freshly hard faced -Belts in good shape -New injectors -Comes with an extra set of new hammers and tub rollers -A/c blows ice cold

2015 Morbark 1300B Track -10,400 hours -C27 No Blow by -One owner machine -Uc is in good condition -Had recent mill work completed Ready to Grind !!!!!!

2018 Morbark 1300B -3800 hours -C-27(1050H.P) -Tight and dry -Has grinded mostly soft wood its whole life Turn Key Unit Ready to Work !!!!!

1992 Morbark 1200 Tub Grinder -10500 hours - 1200 cat 3412 twin turbo 650hp -Mill completely rebuilt and new bearings with 200 hours on it ($33k in repairs) -Replaced turbo pedestal and rebuilt turbos -Entire mill was replaced new with new bearings -Hours are a guess meter says under 1000 I believe so I’m guessing it rolled -Hydraulic cylinders were rebuilt on boom except for squeeze cylinder on grapple -The turn motor on grapple leaks a little -One of the stiff leg cylinders bleeds down for unhooking from truck Ready to grind

1993 Morbark Model 1200 Tub Grinder, Equipped with a Cummins 650 HP Engine, Autofeed, Wireless Control, New Clutch 1 year ago, Hours are Unknown, New Turbo, New Injectors 300 Hours ago, Ready to Work. Weight 55,622 lb Length 38.15 ft Width 11.9 ft Height 12.8 ft Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1994 Morbark Model 1200WCL Tub Grinder, Caterpillar 3412 Engine, hours unknown, Joystick Controls, Square Wear Plates, Enclosed Cab with Heat, Clutch replaced recently, 4" Screen and 2" Round Secondary Screens. Length 36 ft 0 in Width 11 ft 11 in Height 13 ft 6 in Weight 50,020 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2014 Morbark 1200XL-WCL -7571 hours -CAT C27, 875 HP -Cab Loader Option -New Floor -Spare Rotor, Screens, Tips, and Parts Package -Turn Key Ready to Grind

1996 Morbark Model 20 Whole Tree Chipper ,Caterpillar 425 HP Engine, Enclosed Cab with Heat and AC, Needs a Condenser for the AC, Machine has Separator ,Ready for the Woods... Overall Length 21’6” Overall Width 8’0” Overall Height 13’6” Weight 10,000 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1997 Morbark Model 20 Whole Tree Chipper, 250 HP Diesel Engine, Injection Pump installed over 300 HP , 3900 Hours are Showing, Heat in the enclosed cab, New Starter, New Tires and Brakes, 10 sets of extra knives, Ready for the Woods. H 11’5” W 8’6” L 22’9” 26,540 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2004 Morbark 2070XL Chipper with Cat 86HP Diesel, 1000 Hours, Good Running Chipper.

2021 Morbark 1821 Brush Chipper, Gas, Hydraulic Winch, One Owner Trade In.

2014 Morbark Flail 223 Debarker, has a Caterpillar 9.3 that's been deleted. It has 9,249 frame hours and 600 on the engine rebuild. New Hydraulic Clutch Last Year, New Rear Feed Wheels 23" Capacity Ready for the Woods. Length (transport) 33'5" Height (transport) 9'11" Width 9'10" Weight 46,700 lb Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1050 HP C27 engine, Morlift 500, 3 flail with bark conveyor. Boom cylinder being repacked, one owner, rebuilt engine

1994 Morbark 23WCL 23" disk chipper With loader Good condition Includes: extra (new and used) knives, counter knives, & top plate

2007 Morbark Model 23 WCL Whole Tree Chipper, Caterpillar 3412 1000 HP Twin Turbo Engine. Has 9,000 Original Hours, Heat and Ac, AC needs a Charge, New Computer, New Injectors, All Cylinders recently Repacked, All New Hoses, Ready for the Woods Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

1992 Morbark Model 27 Whole Tree Chipper Cat V12 800 HP Engine Currently in production PRICE REDUCED

1991 Morbark 27 Whole Tree Disc Chipper, Cat 3412 750hp with 200 hours on the rebuild, It’s going to need the paddles soon, The knife, pockets and face plates all 80% hood liners and everything else in there is about 70%. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2019 Morbark 40/36 Drum Chipper -1500 hours -C-18 CAT -Deleted -Clean Unit