Clamp Carriers For Sale

Complete with (28) Clamps & Panel Flattener! JLT CLAMPS 79F-12-PC 12' W Panel & Door Clamp Specifications: Clamping cap. 12' W x 40" D. Clamping angle 20°. Clamping force 4,000 Lbs. Weight cap. 3,000 Lbs. Max. no. of clamps: 50 (10 Per level). Equipped with: (5) Clamping levels. Vertical clamp hanger. Complete with: Manual. (28) 39" L Cap. Manual Tightening T-Handle Bar Clamps, Each with 3-1/2" H x 4-5/8" W Jaws. JLT CLAMPS "180A-40" Pneumatic Panel Flattener, with Manual. Dimensions with Panel Flattener: 159" x 60" x 71" H. NOTE: Seller purchased new and states machine has light use. CURRENCY NOTE: Negotiable Price is listed in U.S. Dollars.

JLT - 79K-10: Entry Panel & Door ClampVersatility: Leave the center squaring bar to do multiple doors at once or remove the bar to take advantage of the full capacity of the machine. -- Capacity for solid wood doors: 48" x 120". -- Quick release latches on the jaws; moveable squaring bar. -- Squaring mechanism can be recalibrated, if necessary. -- (2) Horizontal pneumatic clamps. -- (4) Vertical pneumatic clamps. -- 1-Lever operation. -- 1,000 Lbs Clamping force per cylinder. -- 3" Stroke from each cylinder.

JLT CLAMPS 718A-M2-12-M Panel and Door ClampBuddy System includes #79F-12-PC & #717CUnique all-in-one Panel Clamp & Cabinet Door Clamp. -- The DDC has a larger clamping area of 38" Deep x 98" Wide with a splitter for two (2) door clamping. -- Double door design, air operated assembly clamp specifically designed for entry doors, cabinet doors or windows. -- (2) Heavy Duty quick adjusting pneumatic clamping cylinders & (1) quick adjusting cross-clamp on the side. -- (1) Quick adjusting cross-clamp for the rails with (3) draw clamps for the stiles. -- 2" Deep squaring fence along left and bottom sides. -- Single-lever cylinders for quick & accurate clamping pressure. -- Shelf area to hold the pieces of the frame prior to clamping for all squaring components. -- 5-Tier self-supporting rack unit; each tier is 12' wide; total of (18) clamps on the rack. -- 32" or 40" Opening clamps available; must be specified when placing order. -- Clamps with 2-1/2" high jaws and manual movement & tightening. -- Additional clamps are available. -- 40 Sq. ft. footprint.

JLT CLAMPS 79F-M2-8-PC Panel and Door Clamp. An Industry standard for Cabinet doors and so much more. -- (5) Levels of 8' wide x 40" deep cap. -- Heavy tubular frame with (18) clamps. -- Manually adjustable bar clamps that easily set in place and move from side-to-side. -- 40" Clamp opening with a 3-1/2" high x 4" wide jaw. -- Additional opening clamps available.

JLT CLAMPS 79F-M2-6-PC Panel and Door ClampAn Industry standard for Cabinet doors and so much more. -- (5) Levels of 6' wide x 40" deep cap. -- Heavy tubular frame with (8) clamps. -- Manually adjusted bar clamps that easily set in place and move from side-to-side. -- 40" Clamp opening with a 3-1/2" high x 4" wide jaw. -- Additional clamps are available.

JLT 717C-DC Cabinet Door Clamp:Pneumatically operated Cabinet Door Clamp to square & clamp door in (1) Second. -- 26" Front-to-back x 62" left-to-right clamping capacity. -- Single row door clamp with (1) horizontal pneumatic clamp & (2) vertical pneumatic clamps. -- Special mount on a 30° angle for ease of loading & less operator fatigue. -- (3) Large diaphragm cylinders for quick clamping pressure with single lever operation. -- 40 PSI Air pressure to produce 500 Lbs of force on each clamp. -- Shelf to hold the pieces of the frame before pressing on all squaring components. -- 40 Sq. ft. floor space requirement.(Replaces: #717A-DC)

JLT CLAMPS 717C-M Panel and Door ClampPneumatically operated Cabinet Door Clamp to square & clamp a door in (1) Sec. -- 26" Front-to-back x 62" left-to-right clamping cap. -- Special design for mitered doors. -- Single row Door Clamp with (2) horizontal pneumatic clamp & (2) vertical pneumatic clamps. -- Special mount on a 30° angle for ease of loading & less operator fatigue. -- (4) Large diaphram cylinders for quick clamping pressure with single lever operation. -- 40 PSI Air pressure to produce 500 Lbs of force on each clamp. -- Shelf to hold the pieces of the frame before pressing on all squaring components. -- 40 Sq. ft. footprint.(Replaces #717A-M)

JLT CLAMPS 717C-DDC CLAMP, PANEL AND DOOR.Pneumatically operated Cabinet Door Clamp to square & clamp a door in (1) Sec. -- 38" Front-to-back x 98" left-to-right clamping capacity. -- Single row 2-station Door Clamp with (2) horizontal pneumatic clamps and (4) vertical pneumatic clamps. -- Special mount on a 30° angle for ease of loading & less operator fatigue. -- (6) Large diaphragm cylinders for quick clamping pressure with single-lever operation. -- 40 PSI Air pressure to produce 500 Lbs of force on each clamp. -- Shelf to hold the pieces of the frame before pressing for all squaring components. -- 60 Sq/ft footprint.(Replaces #717A-DDC)

JLT 79F-M2-12-PC Panel and Door Clamp An Industry standard for Cabinet doors that offers so much more. -- (5) Levels of 12' width x 40" depth cap. -- Heavy tubular frame with (6) clamps per level x (5) levels for a total of (30) clamps. -- Manually adjusted bar clamps that are easily set in place and can move from side-to-side. -- 40" Clamp opening with a 3-1/2" high jaw. -- Additional clamp openings available.

JLT CLAMPS 718A-M2-8 Panel and Door Clamp Buddy System includes #79F-8-PC & 717C Unique all-in-one Panel Clamp & Cabinet Door Clamp. Specifications: -- 26" Deep x 62" wide clamping cap. -- Single row door clamp, air operated assembly on a 70° angle for entry doors, cabinet doors or windows. -- (2) Heavy Duty quick adjusting pneumatic clamping cylinders. -- (1) Quick adjusting cross-clamp for the rails with (3) draw clamps for the stiles. -- 45° Working angle for easy access & less fatigue. -- 2" Deep squaring fence along left & bottom sides. -- Single lever cylinders for quick & accurate clamping pressure. -- Shelf area to hold the pieces of the frame prior to clamping for all squaring components. -- 5-Tier self-supporting rack unit; each tier is 8' wide; total of (18) clamps on rack unit. -- 32" or 40" Opening clamps available; must be specified when placing order. -- Clamps with 2-1/2" high jaws with manual movement and tightening. -- 40 Sq. ft. footprint.

JLT CLAMPS 718A-M2-12 Buddy System Panel and Door ClampBuddy System includes #79F-12-PC & #717CUnique Panel Clamp & Cabinet Door Clamp all-in-one. -- 38" Deep x 98" wide clamping cap. -- Air operated assembly, single row Clamp on a 70° angle specifically for entry doors, cabinet doors or windows. -- (2) Heavy Duty quick adjusting pneumatic clamping cylinders. -- (1) Quick adjusting cross-clamp for the rails with (3) draw clamps for the stiles. -- 45° Working angle for easy access & less fatigue. -- 2" Deep squaring fence along left & bottom sides. -- Single lever cylinders for quick & accurate clamping pressure. -- Shelf area to hold the pieces of the frame prior to clamping for all squaring components. -- 5-Tier self-supporting rack unit; each tier 12' wide for a total of (18) clamps. -- 32" or 40" Opening available; must be specified when placing order. -- Clamps with 2-1/2" high jaws with manual movement and tightening. -- Additional Clamps available. -- 40 Sq. ft. footprint.

JLT CLAMPS 138B Glue ApplicatorPlate type glue applicator with 8" wide x 48" long applicating capacity. -- Spreader frame is constructed of heavy perforated aluminum components. -- All glue application components such as the grid, glue pan and cover are constructed of steel. -- Foot treadle operated and the grid rises out of the reservoir of glue. -- The thickness of the glue is easily regulated by the operator. -- No daily clean-up is required, simply spray the surface of the glue with water and cover the unit for overnight storage. -- Several depressions of the foot treadle mixes the glue and can thin the glue when water is added.

JLT CLAMPS 79K-10 Panel and Door Clamp; Versatility-Leave the center squaring bar to do multiple doors at once or remove the bar to take advantage of the full capacity of the machine. -- Capacity for solid wood doors 48" x 120". -- Quick release latches on the jaws and moveable squaring bar. -- The squaring mechanism can be re-calibrated if necessary. -- (2) Horizontal pneumatic clamps. -- (4) Vertical pneumatic clamps. -- One lever operation. -- 1000 Lbs of clamping force per cylinder. -- 3" Stroke from each cylinder.Custom sizes available in 1' increments ...ask the Product Manager.

JLT 79F-16-PC Multi Level Panel Clamp16' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (36) clamps total manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps # 302-40-H-R with 40" opening with a 3-1/2" high x 4" wide jaw. -- (72) # 80-1706 Rocker adaptor plates for up to 6" thick glue stock -- (1) Fastener and shim kit for precise clamp alignmentAvailable Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1450 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,150 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,275 -- Clamp 3 1/2" X 40" opening ... $ 160 -- 79-1680-Handle $110 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 16' x 52"W x 70" high

JLT 79F- 6-PC Multi Level Panel Clamp6' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (8) clamps manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps have a 40" opening with a 3-1/2" high x 4" wide jaw. (52" clamp available upon request)Available Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,425 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1100 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,275 -- Clamp 3 1/2" X 40" opening ... $ 142 -- 79-1680-Handle $105 for use with 1/2" drive impact gun (adjustable torque preferred with a setting of 50-55 ft/lbsFloor space requirement: 75" x 70" x 48" high

JLT 79F-8-PC Multi Level Panel Clamp8' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (18) clamps manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps have a 40" opening with a 3-1/2" high x 4" wide jaw.Available Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,425 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,100 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,275 -- Clamp 3 1/2" X 40" opening ... $ 160 -- 79-1680-Handle $120 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 100" x 70" x 48" high

JLT 79F-12-PC Multi Level Panel Clamp12' Wide, free-standing or wall mount Clamp Rack unit.Equipped with: -- (5) Levels for mounting clamps; -- (6) clamps per level (a total of 30) manually adjusted - side-to-side and manual open-and-close for all clamps. -- Clamps have a 40" opening with a 3-1/2" high x 4" wide jaw.Available Options: -- Pneumatic panel flattener with single lever valve operation, 40" reach and flatten up to 1-1/2" thick material, additional: ...$1,425 -- Glue applicator Redi spreader 6" x 27" grid capacity, additional ...$ 1,100 -- Glue applicator Plate spreader 8" x 48" grid capacity, additional ...$2,275 -- Clamp 3 1/2" X 40" opening ... $ 142 -- 79-1680-Handle $110 for use with 1/2" drive impact gun (adjustable torque preferred with setting of 50-55 ft/lbsFloor space requirement: 144" x 78" x 52" high

KREG KFT 4X8 Face Frame Assembly. -- American-Made 4' x 8' Frame Assembly Clamp with floor stand. -- Working surface at approximately 30° angle for convenience. -- Unit includes; (4) Overhead air cylinders mounted on an overhead beam adjustable up-and-down. -- Clamping beam that moves from left-to-right by means of rollers. -- Squaring bars (fences) on the bottom and both ends of the table. -- Clamping beam with an air filter/oiler/regulator and air outlet at lower end of the beam. -- Optional pneumatic screw gun & pneumatic flex hose.

KREG DK 3100 Electric 3-spindle Pocket DrillSpecifications: -- 1.5 HP Direct drive electric motor; 39-1/2" table/ top working height; (0.5 - 1) Sec cycle time. -- Drills (2) pocket holes in (1) machining cycle across rails of varying widths with 3/8" dia. step bit in (1) smooth operation. -- Drill spindles in the machine are fixed at 3/4" - 1" and 1-3/4" on center allowing it to handle most common rail widths of 1-1/2" up to 3-3/4" with ease. -- One of the (3) Spindles is with left-handed, simply remove one bit from the spindle not being used to set the desired 2-hole spacing. -- The bits are supported all the way to the workpiece by a hardened steel drill guide that ensures tear-out free holes and consistent placement in virtually any material.Features: -- 15ø Boring angle for greater stability, reduced screw breakout & splitting. This produces a smaller "flat-bottom" pocket hole with rounded sides that can be plugged with a dowel if desired.Includes: -- Pressure gauge, fence, hold down, and foot pedal control.

KREG DK 5100 5-Spindle Pneumatic Pocket Hole Machine. -- Individually actuated motors, (5) 0.75 HP motors, mounted on 6" centers. -- Hardened steel drill guides to support drill bit through the operation; 1-touch, foot pedal cycle. -- Swings stops for optimized material positioning; dust collection chutes for efficient chip removal. -- Complete with pre-filter and automatic lubricator.