Multiple Drills Single For Sale

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i55 ORBIT OR-1758F 17" 12-Speed Floor-Type Drill Press Specifications: Actual throat 8-1/4". Table dia. 11-1/2". Base size 8" x 8". Quill travel 4-1/2". Chuck capacity 5/8". Spindle speeds 250, 380, 450, 550, 650, 800, 1,110, 1,280 1,420, 1,800, 2,000, & 3,100 RPM. Equipped with: MT2 Spindle taper. 1-1/2 HP - 1,725 RPM Motor.

4 Head drill station 20' with powered roll case Hydraulic set stops

Ritter 3 Spindle Boring Machine

(2) 3 HP Spindle Driver Motors Wired 3-Phase 240 30" X 48" Work Table Surface

SICOTTE J 20-5 Horizontal Boring Machine:12" x 60" Steel table with 2-1/2" manual up-and-down adjustment. -- (4) Drive groups with 1-1/2 HP - 3,500 RPM drive motor each, timing belt & pulley drive. -- (7) Spindles, 2" in dia. and with Jacob chuck 0 - 1/2" capacity. -- Spindle feed powered by 3 HP hydraulic pump, 0" - 6" stroke, variable speed up to (30) strokes/Min.Complete with: -- (3) Pneumatic holddowns, -- Cycle timer 0-30 sec., -- Automatic/manual cycle with foot pedal switch, -- Sinvle or continous stroke -- Emergency stop.

SICOTTE J3H-A-6 Angular Vertical Boring Machine24" x 72" Table size Angular boring machine for chair seat -- (6) Hydraulic self feed spindle having 3 7/8" adjustable stroke and variable speed feed, 1 HP motor, jacob chuck 0 to 1/2" capacity, mounted on 24"long arms with timing belt drive. -- The spindle can be set at coumpônd angle angle with 30 deg front to back and 15 deg right top left. -- (2) Air holddowns. -- 0" - 8" Vertical table feed hydraulically operated that can be used when you drill vetically without angle, , variable feed and table travel adjustable from front of machine, -- 3 HP hydraulic pump motor with reservoir. Complete with: -- Electrical control system with separate motor controls, -- Single or continous stroke, -- Manual and automatic cycle and foot pedal actuation, -- Selector switch to activate each spindle manually . -- This machine is design for chair seat boring or any other application where angular holes are required.

SICOTTE - Airbor 700-6, ...Vertical Boring Machine18" x 72" Table; variable air/oil feed table; up to 6" adjustable stroke.Equipped with: -- (3) Vertical 2" dia. spindles with Jacobs® Chuck, 0 - 1/2" cap.; spindles fully adjustable to entire table surface and can be as close as 2" center-to-center; spindle speed of 3,600 RPM. -- (3) 2 HP - 1,800 RPM motors, each motor timing belt drive mounted on a cast iron base with eccentric locking mechanism and a cast iron arm that has 18" of adjustment.Complete with: -- (2) Air loaded holddowns. -- (1) Foot switch for boring cycle. -- Includes Safety shield.

SICOTTE - J-30-4, ...Vertical Boring Machine24" x 48" Fixed table and moving head.Specifications: -- (3) 1-1/2" Spindle with spring collet, 1/2" capacity. -- (3) 2 HP - 1,750 RPM - TEFC Motors, each motor with timing belt drives. -- (2) Spring loaded holddowns. -- Table is fixed while the heads with spindles move hydraulically up & down with an adjustable speed feed (this arrangement can be equipped with an automatic feeding device).Features: -- 0" - 8" Adjustable head stroke. -- Foot pedal activated. -- Vertical stroke and feed speed of the heads with spindles are both adjustable. -- 3 HP Hydraulic variable feed motor, vertical spindle movement; movement can be set to either manual, single stoke, or continuous stroke.

SICOTTE - J 3H-7, ...Vertical Boring Machine24" x 84" Table size. Equipped with: -- (5) 1.5 HP Motors mounted on 24" long arms with motor starter and overload relay. -- (5) 1-1/2" Dia. spindles with spring collet 1/2" capacity. -- (2) Spring loaded holddowns.Features: -- 0" - 8" Vertical table feed, hydraulically operated; variable feed and table travel adjustable from front of machine. -- 3 HP Hydraulic pump motor with reservoir. Complete with: -- Electrical Control System with separate motor controls. -- Single or continuous stroke. -- Manual and automatic cycle. -- Foot pedal actuation. -- (1) Safety guard.

SICOTTE - T 1050, ...Horizontal Boring Machine 2-Spindle Horizontal Borer.Equipped with: -- 1 HP Motor, timing belt drives with motor starter. -- (2) Horizontal spindles, 2" dia. with Jacobs® Chuck, 0 - 1/2" capacity, turning at 3,450 RPM.Features: -- 4" Boring head stroke with air/oil system and adjustable feed speed. -- Spindle mount on dovetail beam with min. 2" to a max. 11-3/4" center distance.Complete with: -- (2) Pneumatic holddowns & 12" x 16" wooden table size.

SICOTTE - J 3H-6, ...Vertical Boring Machine24" x 72" Table size, (5) Spindles.Equipped with: -- (3) 1 HP Motors mounted on 24" long arms with motor starter and overload relay. -- (5) 1-1/2" Dia. spindle with set screw locking 1/2" cap. -- (2) Spring-loaded holddowns. -- (1) Additional motor started with overload for future installation of a spindle drive motorFeatures: -- 0" - 8" Vertical table feed, hydraulically operated, variable feed, and table travel adjustable from front of machine. -- 3 HP Hydraulic pump motor with reservoir. Complete with: -- Electrical Control System with separate motor controls. -- Single or continuous stroke. -- Manual and automatic cycle. -- Foot pedal actuation. -- (1) Safety guard.

2 Spindle Boring machine 1 Vertical & 1 Horizontal

4 Spindle Multi Drilling Machine

Wisconsin B20-M multiple spindle horizontal drilling machine 8' 4-HEAD 13-SPINDLE DRILLING MACHINE 3 HP DRILLING MOTORS, HYDRAULIC , AIR CLAMP Serial # B20M-6825-96 5 HP hydraulic pump: 230/460V, model CLT-30 GAL, 1050 psi, 8 GPM., serial# 1-89175-0 Four Baldor Drilling motors 3 HP, 208-230/460 volts, 3450 RPM., Baldor, Removed from a complete plant liquidation in October 2020. Stored inside a climate controlled room, Contact us for a delivered price

Woodtek 2 Spindle Boring Machine