Logging Equipment For Sale

2016 Komatsu 430 Feller Buncher, Equipped with a Quadco 22" 360 Degree Wrist, NEW UNDERCARRIAGE, Hours are 8,800, Non Def Engine, Espar Heat, Enclosed Cab with Heat and Air Conditioning, New Swing Bearings, Pump, New Sensor for ICAN, New Starter and Fuel Pump. Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2017 KOMATSU XT-460L FELLER BUNCHER #12475

Polycarbonate windows for Komatsu 911.3 and 911.4 harvester. 1/2" thick abrasion resistant polycarbonate. Available in tint and clear. Check measurements to make sure you are ordering the correct window. The measurements above are the major dimensions, (widest and tallest points only). Call us Today at 715.560.3929

2015 Komatsu Xt 430-3 Feller Buncher -8900 hours -New UC -Fire suppression redone in march -Rebuilt pumps -Rebuilt rotation manifold -TIght and dry -Quadco 22" head(8900 hours) -360 degree tilt Woods ready

LOEWEN 08 FELLING HEAD ROTATOR FITS KOMATSU -3 CONFIGURATION FITS KOMATSU/TIMBCO BAR SAW ATTACHMENTS

2013 Komatsu 430XT Harvester -12040 hours -Uc 40% -Ctl head 24 inch disk -Tight and dry -Everything works as it should Woods ready

6-WHEEL HARVESTER 650/65-26.5 FRON TIRE - 700/70-34 REAR TIRES 2011 KOMATSU 370 24" PROCESSOR/HARVESTOR WITH ROTATING LIKE ATTACHMENT (SN: 370022438), COMPUTERIZED MEASURING FEED ROLS, TOP SAW

Quadco 22SC Sawhead

2017 Komatsu 931XC Processor, Equipped with a C144 Processor Head, 10,800 Hours, New Main Hydraulic Pump, New Fuel Injection Pump, 1 Set of Eco Tracks, a second set of Evo Tracks on Rear, Ready for the Woods. Weight: 48,281 lbs. Width: 9 ft. 1 in Length: 26 ft. 4 in Height: 12 ft. 11 in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 Komatsu 895 Fowarder -18,300 hours -Tight and dry -780/50-28.5 tires 70% -Tracks are 30%. -Spare tire no rim

2022 Komatsu 931XC Track Unit, Includes C-144 Processor Head Attachment, Computer System, ONLY 2,000 Hours, Pre Heater, Enclosed Cab with Heat and Air Conditioning, Machine is Like New Ready for the Woods. Operating weight 48,281 lbs Transport length 26.31 Transport width 9.8 Transport height12.92 Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

LINKBELT 4040 Log LoaderSpecifications: -- Engine: 207 HP -- Tail Swing: 11'6" -- Typical Working Lift Capacity 26,250 lbs -- Jewell 63" Shovel Logging Grapple -- Fuel Capacity: 216 gal -- Hours: Approx. 18,500Equipped with: -- Waratah HTH624c Harvesting Head -- Triad Fuel Pump & Injectors -- Side-Entry Cab

AM FM RADIO FIRE EXTINGUISHER LIGHTING ULTRA LOW SULFUR DIESEL FUEL

MLS Number 12742719 2015 Link-Belt 370LX Log Loader 12,692 hours Cab riser Isuzu 7.8L diesel CWS Butt-N-Top grapple No oil leaks Grousers 80% UC 50%

1998 Linkbelt LS 3400 Track Log Loader, Hour's 12,000. Undercarriage is at 40%, new motor on Swing. Ready for work. Length 33 ft 0 in Width 9 ft 9 in Height 10 ft 11 in Weight 52,910 lbs Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2005 Linkbelt 210 LX Track Log Loader, Tilting Cab, New Undercarriage last Year, Both Final Drives Resealed, All Cylinders including Grapple Cylinders Repacked, 90% of Glass Windows Replaced, Enclosed Cab with Heat and AC, Heavy guarding and Cat Walks, Pierce Boom and 52" Grapple. Ready for the Woods. Operating Weight 59,013 lb Shipping Length 42.91ft in Shipping Height 10.71ft in Overall Width 11.96ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 Link-Belt 210 LX Logging Processor Hours 11,263 Equipped with 470 Waratha processing Head Less than a thousand hours on a new hydraulic pump Has big radiator installed Long Pierce built boom Log guarded 18" forestry cab riser Heavy metal roller doors U/C is good Machine and head have been serviced and ready to work. Head has super cut system very fast head knives have all been replaced, machine and head have lots of extras that will go with it.

KOMATSU 430-5 BRACKET FIXED MOUNT 411XL BAR SAW BOTTOM WITH 3/4" CHAIN INTEGRATED TOP SAW HYDRAULIC UPPER DELIMBING KNIFE 360 DEGREE NON-CONTINUOUS FIXED MOUNT ROTATION LOGMATE 510 CONTROL SYSTEM 1.3-71.3 CM BETWEEN FEED ROLLERS MAX CUT DIAMTER OF 80 CM V-STEEL ROLLERS 4182 LBS

Like New Lohmann GFT 60 for Timbco 425 and Timberpro 725