Woodworking Equipment For Sale

LOEWER DENIBBING SANDER4-Head, 53" width cap., great Denibbing Sander -- The patented conbination of rollers and rotating / oscillating discs makes the Perfection BBDD sanding machiine the ideal finishing solution for entry doors, cabinet doors, drawer fronts, sheet foods, shutters, face frames, furniture and much nore. -- The LOWER DMBBDD sanding machine is sthe ideal soluton for all sanding applications including whitewood, stain and sealer coats(inciuding UV). The work piece first passes under two large counter rotating spiral hubs, then under eleven rotating discs that oscillate from left to right. This provides very uniform edge breading in whitewood sanding and eliminates most (if not all) hand sanding of the sealer coat. -- The patented combination of roller and rotating discs provieds very uniform sanding across the entire work piece, even into deep profiles without loosing detail. -- SPECIFICATIONS OF MACHINE --Thickness of work piece Min: 10mm (1/2")-- Max: 80mm (3") --Feed belt width Max:1350mm (53") --Feed belt motor 1.5 KW (3Hp) 3-15 M/min (10-50 Ft/min) --Top sanding roller 2.2KW (3Hp) 25-300 O/min (RPM) --Disc Rotation 2.2KW (3Hp) 25-300 O/min (RPM) --Disc Osciliatiojn ).37KW (0.5) 10-60 O/min (RPM) --Vacuum motor 7.5KW (10Hp) --Machine weight 1,800 kg -- Aproximate Machine dimensions based on similr machine W:2000mm (6'7")/ L:2780mm (9'2")/ H:6'11")

dowel machine made by Loser Machine type: AA 220 Machine # 1116 Bi 80 Voltage: 440 Hertz 60 Removed from service November 2020. for dowel diameter approx. 6-13 mm smallest cutting length 15 mm The dowel length is adjustable between 20 and 150 mm and is determined by means of an adjustment scale. The chamfer thickness can be set as required.

Reconditioned MAC 144MCF153 Reverse Air Bag House, 2,219 SQ/FT Cloth Media, 18,000 CFM Capacity @ 8:1 Air/Cloth Ratio, 12” Rotary Valve, Structural Support, VERY GOOD CONDITION, $38,000

MACMAZZA TS 90 FRONT LOAD, AUTO. PANEL SAW: -- Specifications: -- 169" Cutting length; 2.83 effective cutting height, 12 HP main saw motor. -- Features: -- Variable saw carriage travel speed 3 - 328 FPM, constant return of 328 FPM; electronically controlled overhead program fence, rack & pinion driven on both sides, forward & return speed 2 - 164 FPM, equipped with (6) clamps. -- PC-Based LENOVO 90GA computer control with CELERON Quad-Core J3455 Processor & 19" color monitor, 4 GB RAM, 1,000 GB Hard drive, (6) USB Ports. -- Complete with: -- Rear table constructed of aluminum profiles with plastic rollers, (3) front air floatation tables; side pressure device for crosscutting on pressure beam.Photos not of actual machine.

1997 NPN MACO Tie Machine, s/n 1997001, 100hp electric motor on side planers, includes electric control box, 4-1/2" capacity, power outfeed.

MAGGI GT 800 CNC MACHINING CENTER: -- SpecificationsFlexible "Vertical/Horizontal" Boring & Grooving Machining Center that can reach movement speeds of: 82 FPM (25 MPM) in "X" & "Y" axis & 49 FPM (15 MPM) in "Z" axis with total safety. -- Working FieldMax. part size for "X" axis is virtually infinite; "Y" axis 31.5" (800 mm); max. part thickness 2" (50 mm). Min. part size for "X" axis is 9.84" (250 mm); "Y" axis 3.93" (100 mm); min. part thickness of 0.39" (10 mm).Panel End/Edge Reader for perfect panel positioning/placement. -- Boring Unit:Suitable for drilling on face & sides of panels including: Holes for dowels, hinges, KD fittings, and shelf holes.(1) Boring block with: 3 HP (2.2 kW) - 3,400 RPM Motor; (7) vertical spindles with: (4) Spindles in "X" axis & (3) spindles in "Y" axis.(1) Horizontal spindles with: (1 + 1) In "X" axis for top & bottom edge boring.(1) "X" Axis grooving saw: 5,000 RPM; Max 100 mm saw blade diameter.Boring Capacity: 0 to 800 mm (31-1/2") with any spindle. -- Operator & Machine ControlPC Front End with: Extremely intuitive user interface with up to (1,000) program storage space; real-time multitask processing.12" TFT "Touchscreen "Monitor; soft touch keypad & industrial mouse; RS-232 Serial ports, USB ports; (1) CD ROM drive. -- Complete with:Pneumatic part clamping roller devices; auto lubrication system; sound enclosure & safety devices. -- Actual Model is: MAGGI GT 800

MAGGI SYSTEM 23 Construction Hole Boring Machine Adjustable 23-spindle boring head on 32 mm centersSpecifications: -- Stops in 0° & 90° with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with patented setting device. -- (2) Patented material clamps with auto-setting & safety feature. -- Head height fine adjustment with a mechanical digital readout. -- 2 HP - 2,800 RPM Motor. -- 38" x 16" Table with mechanical digital side fences for mirror-image. -- 120" Line Boring fence with (4) repeat stops & spring loaded repeat pin. -- Foot actuated pneumatic clamps & drill cycle. -- Magnetic starter, overload protection and (1) set of "quick change" chucks. -- Dust Outlet: 3".Net weight: 630 Lbs; Dimensions: 51.7" x 37.8" x 50" Tall; Crated Dimensions: 44" x 38" x 42" Tall; Crated Weight: 664 lbs.Available in single phase ... Add $ 600.00

MAGGI SYSTEM 29 CONSTRUCTION/LINE BORERAdjustable 29-spindle boring head on 32 mm centers with position indicator. -- Stops in 0° & 90° with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with patented setting device. -- (2) Patented material clamps with auto-setting & safety feature. -- Head height fine adjustment with mechanical digital readout. -- 2 HP - 2,800 RPM Motor. -- 45" x 16" Table with mechanical digital side fences for mirror-image. -- 120" Line boring fence with (4) repeat stops & spring loaded repeat pin. -- Foot actuated pneumatic clamps & drill cycle. -- Magnetic starter, overload protection and (1) set of "quick change" chucks. -- Other Accessories also Available!

MAGGI SYSTEM 46 Double Head Line Boring Machine:Heavy Double Head Line Borer with (2) 23-spindle heads; 32 mm spindle spacing.Specifications: -- Drilling from the bottom up and with 5-1/8" - 25-19/32" distance between rows. -- Drilling vertically from the bottom allows the chips to drop down falling out of the holes. -- Drilling depth of up to 2-1/16" (55 mm) max., takes only seconds to set. -- (2) 2 HP - 3,500 RPM Commercial Duty motors; spindles with steel gears & high quality bearings. -- Easy repetition by (2) air index pins for continuous line drilling, left and right roller track supports extend up to 400 mm (15-3/4") for larger panels.Features and Includes: -- 120" Back fence with (4) repeat "flip" stops; includes 27-3/4" (704 mm) fence for quick positioning of flip stops. -- (6) Pneumatic holddowns to automatically actuate when the drill cycle begins. -- (46) "Quick Change" chucks for easy tool change. -- Magnetic motor controls and 1/4" air regulator with filter and oiler; 100 PSI required air pressure.

MAGGI SYSTEM 21 PRESTIGE Construction & Line BorerAdjustable 21-spindle boring head on 32 mm centers with position indicator.Specifications: -- Stops in 0° and 90° with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with patented setting device. -- (2) Patented material clamps with auto-setting & safety feature. -- Head height fine adjustment with magnifying glass viewer. -- 2 HP - 2,800 RPM Motor. -- 34" x 15" Table with mechanical digital side fences for mirror-image. -- 120" Line Boring fence with (2) repeat stops. -- Foot actuated pneumatic clamps & drill cycle. -- Magnetic starter, overload protection and (1) set of "quick change" chucks.OPTIONAL: -- 230V Single Phase add $600.00 --29900100 Stop Reference Pin for Line Boring $195.00 -- 26000069 Set of Reference Fences for 45 and 90 degrees $195.00 -- 36000061 Additional Quick Change Bit Adaptor $27.50 ea -- 29971019 Additional Holddown Cylinder Assembly $395.00 ea -- Hinge Boring Head (Specify Blum, Grass, Salice, or Hettich) $695.00 -- TDBSE5705LH or RH 5mm x 57mm LH OR RH Brad Point $9.85 ea -- TDBSE5708LH or RH 8mm x 57mm LH OR RH Brad Point $11.95 ea -- TDBSEHB5735LH or RH 35mm x 57mm LH OR RH Hinge Point $26.80 ea -- FREIGHT TO ANYWHERE IN THE CONTINENTAL USA $ 300.00

MAGGI SYSTEM 35 CONSTRUCTION/LINE BORINGAdjustable 35-spindle boring head on 32 mm centers with position indicator. -- Stops in 0° & 90° with pneumatic positioning in vertical & horizontal. -- 0" - 2-1/2" Adjustable drilling depth with patented setting device. -- (2) Patented material clamps with auto-setting & safety feature. -- Head height fine adjustment with mechanical digital readout. -- 2 HP - 2,800 RPM Motor. -- 45" x 16" Table with mechanical digital side fences for mirror-image. -- 120" Line boring fence with (4) repeat stops & spring loaded repeat pin. -- Foot actuated pneumatic clamps & drill cycle. -- Magnetic starter, overload protection and (1) set of "quick change" chucks. -- Other Accessories also Available!

- Min. panel length 9.06 inch - Max. panel length 10 ft 5.98 inch - Min. panel width 8.27 inch - Max. panel width 4 ft 3.18 inch - Panel stack station - no. stations 1 loading - Max. panel stack height 5 ft 2.99 inch - Work capacity 13 Cycles/min - Lifting capacity 100 Kg - Panel stack infeed - Movement system with frame System suction cups - Vacuum pump - no. pumps 1 - Control system - PLC MAGELIS

MAKITA LS1013 10" Double Bevel Sliding Compound Miter Saw, with Stand Specifications: Miter angles 52° Right & 47° Left, with (9) Positive stops at 15°, 22.5°, 31.6°, & 45° Left or Right & 0°. Bevel angles 45° Right & 45° Left. Dimensional lumber cut capacity: 2" x 12" at 90° & 2" x 18" at 45° Left. Arbor dia. 5/8" Equipped with: 1,430 W - 13 A - 3,700 RPM Motor, with Electric brake. Complete with: DELTA "55-155" Universal Miter Saw Stand. Machine with Stand Dimensions: 104" x 28" x 59" H. Machine Dimensions: 30" x 28" x 25" H. Machine Weight: 50 Lbs. Stand Dimensions: 104" x 22" x 35" H. Stand Weight: 85 Lbs.

ROTOFAST 10 panel cleaner is designed for automatic cleaning of parts just prior to coating application for a dust-free finish. A rotating brush is combined with air blow-off units and an anti-static bar in order to efficiently clean flat or profiled parts of different shapes and dimensions. KEY FEATURES --Top surface One rotating brush with variable speed and height adjustment --One de-ionizing (anti-static) bar --One group of rotary blowers with timed entry --One group of fixed blower nozzles with timed entry Bottom surface --One group of fixed blower nozzles with timed entry --All components housed in single cabinet with suction hoods --Feed speed adjustable by potentiometer --Rubber pressure rollers to secure parts while brushing --Belt conveyorWeight 600 Kg.

MAKOR LTS/6E Profile Sander(6) Stations, 6"Width Capacity (approx), PLC Controller. -- 5.5HP Variable Speed Feed Motor with (6) 6"W Powered Feed Belts. -- 1st Station: Tiltable 3-Point Oscillating Profile Sander, 24" Contact Sanding Area, 2HP MAKOR Motor with Cooling Fan and J1000 Drive. -- 2nd Station: Tiltable 3-Point Oscillating Profile Sander, 24" Contact Sanding Area, 2HP MAKOR Motor with Fan and J1000 Drive. -- 3rd Station: Tiltable Polishing Head 2HP MAKOR Motor with Fan and J1000 Drive. -- 4th Station: Tiltable Polishing Head with with 2HP MAKOR Motor with Fan and J1000 Drive. -- 5th Station: Tiltable Polishing Head with 2HP MAKOR Motor with Fan and J1000 Drive. -- 6th Station: Tiltable Polishing Head with 2HP MAKOR Motor with Fan and J1000 Drive.

MAKOR LTSI/6 Profile Sander(6) Stations, 6"Width Capacity (approx), PLC Controller. -- 5.5HP Variable Speed Feed Motor with (6) 6"W Powered Feed Belts. -- 1st Station: Tiltable 3-Point Oscillating Profile Sander, 24" Contact Sanding Area, 2HP MAKOR Motor with Cooling Fan and J1000 Drive. -- 2nd Station: Tiltable 3-Point Oscillating Profile Sander, 24" Contact Sanding Area, 2HP MAKOR Motor with Fan and J1000 Drive. -- 3rd Station: Tiltable Polishing Head 2HP MAKOR Motor with Fan and J1000 Drive. -- 4th Station: Tiltable Polishing Head with with 2HP MAKOR Motor with Fan and J1000 Drive. -- 5th Station: Tiltable Polishing Head with 2HP MAKOR Motor with Fan and J1000 Drive. -- 6th Station: Tiltable Polishing Head with 2HP MAKOR Motor with Fan and J1000 Drive.Dimensions are 20’ L x 5’ W, 8’ H, and weighs approximately 7,000 lbs.

Makor Start One M (S-ONE-M) Finishing Line Infeed & Outfeed System Storage Trolleys This line has been removed from operation and is in dry storage, as shown in the last (3) photos.

System includes: Vacuum Coater UV Oven with (9) lamps Lateral Transfer Table Max width 9" Able to run clear or pigmented coating

MAKOR Q-ONE Feed Through Spray Machine. -- The Q-ONE sprayer is a single arm Reciprocating System with a paper belt overspray collection; it combines productivity, flexibility, and quick change-over with a limited investment. -- This continuous belt conveyor system, combined with disposable paper promotes a "self-cleaning" machine & dramatically reduces clean-up & service time.Operation: -- Suitable for all types of conventional coatings from solvent to water-based materials; -- Conveyor advances only when parts are present. -- Conveyor system with a vacuum belt to secure & support the feeding of the disposable paper, ensuring proper tracking & automatic winding of the paper roll. -- The paper roll change-over time is only a few minutes. The panel lies flat on the belt which prevents the transfer of over-spray onto the bottom side. -- Spraying enclosure is pressurized via (2) intake fans and filtered by means of dry filters. -- This system allows clean air & maintains a consistent airflow throughout the Spray Cabin, also limiting the machine maintenance time to a minimum and producing an enhanced quality finish, control & containment of over-spray, resulting in significant material economy. Internal airflow is adjustable utilizing inverters. -- Spray system uses an inverter drive and variable speed reciprocating trolley which provides a consistent spray speed & pattern across the entire conveyor belt. Equipped With: -- Spray system with (4) spray guns, mounted on a "Quick-Change" gun support trolley. -- (2) High-pressure lacquer feeding circuits with recycle through a fluid distribution manifold (pre-disposed for (2) additional laquer feeding circuits). -- PLC touch-screen for clear visual operator interface & large memory storage of working programs, parameters, controls & diagnostic functions. Photo diode light bar reads the location and size of part to be sprayed.Technical Specifications: -- Working Width: 0 - 1,300 mm (0" - 51"). -- Feed Motor: 0.75 kW, variable speed control from 2.5 - to 5 MPM (8 - 16 FPM). -- Vacuum Belt Motor: 1.5 kW(2 HP). -- Paper Rewind Motor: 0.18 kW. -- Paper Roll: Dia. 21.5" max. (approx. 9,500 lineal ft.). -- Reciprocator Motor: 2.2 kW. -- Exhaust Fan Motor: 5.5 kW. -- Air Flow: 7,950 CFM. -- Pressurization Air: 2 x 3,900 CFM. -- Total Installed Power: 13 kW.NOTE: Really still like new with Very Low hours !! It's probably still the original roll of paper on the machine.

MAKOR Q1 Spray Line including Paint Pumps and Guns:This line was set up with the idea of adding a stack oven after the sprayer in the future if it is required. This line has seen very little use.Station #1: Infeed loading conveyorStation #2: MAKOR Q1 paper belt sprayer 3 circuits plus a cleaning circuit.Station #3: Ppowered roller conveyorsStation #4 (3) three lamp UV oven. Station #5: Outfeed conveyor. The line comes with (2) two paint pumps and (4) four spray guns, the brands GRACO MERKUR and GRACO spray guns. Reciprocating Spray Machine, Makor Q-ONE 1300 with Changeover SystemFlexibility, reliability, and ease of use, combined with limited managing cost and investment, make Q-ONE the ideal machine for companies with low-volume production applying water-based or solvent-based paints, or glues. Even companies switching to automatic coating applications for the first time can realize the advantages of the Q-ONE: Higher production and paint savings, uniform coating, and higher and more consistent quality.Structure and Transport System:The single steel frame guarantees perfect stability and the absence of vibration during the oscillating spraying. A part reading bar is located at the entrance of the machine to detect the workpiece shape to optimize paint consumption. The workpiece transport system consists of a paper belt or plastic film supported by a vacuum belt system makes the machine self-cleaning, eliminating downtime and maintenance costs, but does not allow the recovery of the sprayed productoverspray is prevented from accumulating on the lower side of the workpiece paper roll replacement is quick and easy.Spraying Group:The guns, mounted to oscillating supports, are adjustable to allow optimal orientation of the spraying zone the entire oscillating group is connected to the frame of the machine through pads that guarantee the absolute absence of vibrations, resulting in perfect paint quality on the workpieces, the pressurization of the zone containing the oscillating mechanisms extends its life and requires little maintenance.Four (4) guns can be connected to one of the three (3) coating circuits three (3) high-pressure circuits with recycle for coatings one (1) high-pressure circuit (without return) for solvent. Coating circuits have return hoses for quickly washing the circuit and for the recirculation of paint-standard supply provides two (2) gun holding plates with a quick disconnection system to allow for fast replacement of the spraying unit.Paper Unrolling and Rewinding System:The unrolling system at the entrance and the rewinding device at the exit are designed to maintain constant tension of the paper, avoiding breakage even when it is soaked by the paint, loading and unloading the support rolls are easy due to lateral pull out on wheeled carriers. An independent vacuum hold-down fan enables superior control of the paper belt rewind station and includes a self-adjusting system to maintain a consistently flat paper belt transport