Woodworking Equipment For Sale

3 Moulding heads 1 grooving head workpiece length 2300 mm workpiece thickness 35 mm Hopper feed Numeric controller

OMGA 2005 OPT 4000 Saw w/ Infeed and Outfeed Model J2005

OMGA Radial Arm Saw

TI Series machines are equipped with (2) cutting units. The left cutting unit is fixed while the right unit is moveable from 320 mm min. to 2,500 mm; max. opening (12-1/2" min. to 98" max. opening). -- Each cutting unit is equipped with (1) 350 mm dia. main blade and (1) 80 mm scoring unit. Both cutting units are tiltable up to 45° and feature adjustable height. The cutting units are equipped with a pneumatic system that opens out the blades 1 mm at the end of the cut. -- Between both units there is a support on which thin panels rest to avoid deflection. The machine also includes (4) pneumatic hold-downs to insure stability of the panel. NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

Omga RN-600 FM Radial Arm SawSpecifications: -- Max. crosscut cap: 23-5/8" Wide x 4-1/2" deep (at 90°) -- 4 HP (2.9 kW) - 3,400 RPM motor -- 14" saw blade and a 1" dia. arbor; the saw head swivels & tilts both in the horizontal & vertical axis. -- 3-3/16" Depth of cut at 45° bevel cut, ripping cap. is 32-5/8", miters 45° to left & right. -- Table size of 27" x 26", wooden tabletop with built-up full-length back fence.Equipped with: Totally enclosed upper blade guard, gravity type lower blade guard, self-braking motor with electromagnetic brake (stops blade within approx. 2 Sec), magnetic controls, and push button station.Complete with: Steel fence and (8) position stops.Actual Model RN 600 FMNOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

OMGA Radial 1250-7 Radial Arm Saw -- Specifications: 7 HP Saw motor, 43.897" crosscut cap. at 90°; 6-7/8" thickness cap. at 90°, 4-7/8" at 45°; 59" rip cap.; 20" dia. blade with 1" bore; 1-3/4" max. dado cap.; 3,400 RPM Arbor Speed. -- Features: Solid saw carriage with replaceable tempered steel sliding tracks. -- Carriage travels on (8) bearings with dust scrapers for smooth travel & extended track life. -- 180° Swivel of entire saw carriage for mitered crosscuts. -- 45° Saw head tilt for compound miter cuts. -- Complete with: Spring loaded return for safe return of saw head after completion of the cut; 58" x 44" replaceable wooden tabletop with full length back fence; fabricated open steel base; electromagnetic brake to stop the blade within (2) Seconds. -- Includes: Magnetic controls, push button controls & thermal overload switch. -- OPTIONAL EQUIPMENT WHEN ORDERED WITH MACHINE: -- Automatic Air-Over-Oil Head Feed System, foot pedal activated, add $4,379.00 -- Vertical Pneumatic Clamp, add $ 675 -- Horizontal Pneumatic Clamp, add $929 -- RH or LH Roller Table, 6'-7" X 24", add $1,687 -- 3' Aluminum Fence Extension, add $410 -- 6' Aluminum Fence Extension, add $580

OMGA 900/7 FM RADIAL ARM SAW Specifications: -- 7 HP Saw motor, 35-1/2" crosscut cap. at 90°; 24-15/16" @ 45°; 5-7/8" max. thickness cap. at 90°, 4-3/16" at 45°; 43-5/16" rip cap.; 18" dia. blade with 1" bore; 2" max. dado cap.; 3,400 RPM arbor speed.Features: -- Solid saw carriage with replaceable tempered steel sliding tracks; carriages that travel on (8) bearings with dust scrapers for smooth travel & extended track life; -- 180° Swivel of entire saw carriage for mitered crosscuts; 45° saw head tilt for compound miter cuts.Complete with: -- Spring loaded return for safe return of saw head after completion of the cut; -- Oversized replaceable wooden tabletop with full length back fence; fabricated open steel base; -- Electro-magnetic brake to stop the blade within (2) seconds.Includes: -- Magnetic controls, push button controls & thermal overload switch.

OMGA RN 450 Radial Arm SawSpecifications: 3 HP Saw motor; 12" blade; 17-3/4" crosscut cap.; 26-3/4" rip cap.; 3-1/2" @ 90° thickness cap., 2-1/2" at 45°; 1-1/2" dado cap.; solid saw carriage with replaceable tempered steel sliding tracks. -- Equipped with: -- Carriage that travels on (8) bearings with dust scrapers for smooth travel & extended track life.180° Swivel of entire saw carriage for making mitered crosscuts; 45° saw head tilt for compound miter cuts; spring-loaded return for safe return of saw head after completion of the cut. -- Complete with: -- Oversized replaceable wooden table top with full length back fence; fabricated open steel base; electro-magnetic brake to stop the blade within (2) seconds. -- Includes: -- Magnetic controls, push button controls & thermal overload switch.

OMGA RADIAL ARM SAW 900-7 -- Specifications: -- 7 HP Saw motor, 35-1/2" crosscut cap. at 90°; 24-15/16" @ 45°; 5-7/8" max. thickness cap. at 90°, 4-3/16" at 45°; 43-5/16" rip cap.; 18" dia. blade with 1" bore; 2" max. dado cap.; 3,400 RPM arbor speed. -- Features: -- Solid saw carriage with replaceable tempered steel sliding tracks; carriages that travel on (8) bearings with dust scrapers for smooth travel & extended track life; 180° swivel of entire saw carriage for mitered crosscuts; 45° saw head tilt for compound miter cuts. -- Complete with: -- Spring loaded return for safe return of saw head after completion of the cut; oversized replaceable wooden tabletop with full length back fence; fabricated open steel base; electro-magnetic brake to stop the blade within (2) seconds. -- Includes: -- Magnetic controls, push button controls & thermal overload switch. -- Options: Blade, Dado head guard, Dust collection system, & roller tables for infeed & outfeed.

OMGA RADIAL ARM SAW MODEL 900 Series RN Solid saw carriage with replaceable tempered steel sliding tracks. -- Carriage travels on (8) bearings with dust scrapers for smooth travel & extended track life. -- 180° Swivel of entire saw carriage for making mitered crosscuts. -- 45° Saw head tilt for compound miter cuts. -- Spring loaded return for safe return of saw head after completion of the cut. -- Oversized replaceable wooden tabletop with full length back fence. -- Fabricated open steel base. -- Electromagnetic brake to stop the blade within (2) Sec. -- Magnetic controls, push button controls & thermal overload switch. -- Options: Single-phase motor, Blade, Dado head guard, Dust collection system, and Roller tables for infeed & outfeed.

OMGA RN-700 RADIAL ARM SAW Specifications & features: -- 5 HP, 27-1/2" Crosscut cap. @ 90°; 19-7/16" @ 45°. -- Solid saw carriage with replaceable tempered steel sliding tracks. -- Carriage travels on (8) bearings with dust scrapers for smooth travel & extended track life. -- Self-centering locking in the positions of the main angles in (3) places, the saw arm (1), the motor & blade assembly swivel (2), and the motor carriage tilt (3); additionally manual locking at all intermediate angles. -- Easy and extremely practical unlocking of the arm for left/right swing on the front of the beam. -- Swiveling of the saw blade assembly and tilting of the blade on the vertical and horizontal axes. -- Standard overload protection with no-volt coil and motor brake. -- Spring-loaded return for safe return of saw head after completion of the cut. -- Oversized replaceable wooden tabletop with a full-length back fence. -- Fabricated open steel base. -- Magnetic controls, push-button controls & thermal overload switch. -- Options: Single-phase motors, Blade, Dado head guard, Dust collection system, & Roller tables for infeed & outfeed.

OMGA RADIAL 600 P3S Radial Arm Saw - 24" Crosscut Solid saw carriage with replaceable tempered steel sliding tracks. -- Carriage travels on (8) bearings with dust scrapers for smooth travel & extended track life. -- 180° Swivel of entire saw carriage for mitered crosscuts. -- 45° Saw head tilt for compound miter cuts. -- Spring loaded return for safe return of saw head after completion of the cut. -- Oversized replaceable wooden tabletop with full length back fence. -- Fabricated open steel base. -- Electromagnetic brake to stop the blade within (2) Seconds. -- Magnetic controls, push button controls & thermal overload switch. -- Options: Single-phase motor, Blade, Dado head guard, Dust collection system, and Roller tables for infeed & outfeed.

OMGA RN 450 Radial Arm SawSpecifications: -- 3 HP Saw motor; 12" blade; 17-3/4" crosscut cap.; 26-3/4" rip cap.; 3-1/2" @ 90° thickness cap., 2-1/2" at 45°; 1-1/2" dado cap.; solid saw carriage with replaceable tempered steel sliding tracks. Equipped with: -- Carriage that travels on (8) bearings with dust scrapers for smooth travel & extended track life.180° Swivel of entire saw carriage for making mitered crosscuts; 45° saw head tilt for compound miter cuts; spring-loaded return for safe return of saw head after completion of the cut. Complete with: -- Oversized replaceable wooden table top with full-length back fence; fabricated open steel base; electro-magnetic brake to stop the blade within (2) seconds. Includes: -- Magnetic controls, push button controls & thermal overload switch. -- Single-phase 2 HP motor available.

--Make an Offer!--Liquidation Surplus Machine-- OMPEC TRO/10/R50 TYPE CE 3200 10-1/2' Hydraulic Veneer Guillotine, with 10° Cut & 50 mm (1.97") Fence Teeth Specifications: Max. cutting length 3,250 mm (127.95"), Nominal cutting length 112". Cutting width 23 - 1,020 mm (0.91" - 40.16"). Max. cutting height 80 mm (3.15"). Table height 950 mm (37.40"). Equipped with: 7.5 kW (10 HP) Hydraulic motor. Motorized parallel back fence, with 1/2 HP Motor, Digital readout, & Hand wheel for fine adjustment, and Parallel rack & pinion guides. 2-Handed operation & Safety light curtain. Complete with: Manual. Replaceable cutting pads. NOTE: Very well maintained, though machine has been stored outside under tarp, thus some surface rust can be expected.

Onsrud Inverted Router

The machine has been cleaned, checked and repaired 5HP 230V 3Ph

Optisand L202 Moulding Sander

OPTI-SAND - R52V, ...Denibbing Brush SanderSpecifications: -- 1-Head, 52" max. width cap., 0" to 5" max. part thickness opening; designed to completely and thoroughly finish sand and sealer sand workpieces such as raised panel cabinet doors, entry doors, louvers, shutters, etc. -- Equipped with: (1) Carousel head with: (4) Rotating arbors mounted on a central rotating deck assembly; carousel deck rotation 4 to 24 RPM; (2) arbor/spindles are 12" x 41" long with 3 HP motor & (2) arbor/spindles are 12" x 35" long with 2 HP motor; 60 to 600 RPM spindle speed. -- Feed System with: Variable vacuum conveyor belt feed; variable feed speed 4 to 44 FPM; 2 HP feed through drive; 10 HP vacuum motor. -- Control Panel: Spindle speeds, head rotation speeds, and conveyor speeds are all inverter controlled with infinite knob adjustment and digital readouts; workpiece height is push button adjusted with digital readout.Single button reverses spindle direction allowing a change from whitewood to sealer sanding by having single-sided strips of different grit facing each direction. -- Cabinet: Heavily insulated cabinet for a quieter run; (1) front & (2) side viewing windows; (4) easy access doors; (4) dust collection outlets of 6" each.Note: Machine is missing cover as shown in photos and will also need a new feed belt; not included in the sale price.

OPTI-SAND L202 Abrasive Brush Feed Through Sander;2-Head Abrasive Brush Sander with (1) top & (1) side heads use standard abrasive heads or cored brush loadings (not included). 11-3/4" Width and 4" height capacity.Specifications: -- Overhead counter-rotating arbor, 12" long arbors x 12" max. dia. sanding discs. -- Head is mounted on a height adjustable common plate with a slide assembly. -- Head tilts up to 15° and 1 HP Motor drives each arbor with inverter for variable 100 - 1,000 RPM arbor rotation speed. -- (1) Side mounted abrasive/brush head, tilt and front head adjusts in-and-out via locking hand-wheel, 6" long arbors x 8" dia. max. sanding discs. -- 0.5 HP Motor drives each arbor with inverter for variable 100 - 1,000 RPM arbor rotation speed; all arbors are 50 mm hexagonal for positive non-slip rotation.Feed System: -- 0" - 5" Max. part height adjustment via locking hand-wheels; 86" long fixed roller conveyor feed bed with rubber rollers, -- (2) 0.25 HP DC motor drives with variable feed speed 10 - 100 FPM -- (6) Full width overhead soft rubber pressure rollers located at infeed, outfeed and between sanding heads, rollers are connected overhead for quick height adjustments.Includes & Features: -- Centralized control panel with digital displays and touch screen controls for spindle speed and feed rate. -- (2) 4" Dia. dust ports, min. 1,400 CFM dust collection required.

ORIGINAL 3579-20L Metal Cutting Radial Arm Saw (Super Duty Series)The Super Duty Series is the ultimate workhorse of the industry, capable of operating 2 to 3 shifts per day. Miter & bevel cutting, compound miters and dado operations. Constructed of heavy duty cast and ductile iron for vibration free operation. Aluminum, Brass, Bronze, Copper, Fiberglass, Lead Sheets, Plastic, Steel. Specifications: -- 7.5 HP TEFC Saw motor; 20" dia. blade; 1" x 3-1/8" saw arbor; 7" thickness cap. @ 90°, 3-3/8" @ 45° bevel; 32" crosscut cap. with 1" stock; 21-5/8" max. miter cut @ 45°. -- Features: -- Swivel arm for miter cuts, swivel motor for bevel cuts; indexing yoke to 90° for rip cutting panels; saw head with automatic motor brake and manual chain feed assembly; positive locking device for tilting; upper and lower blade guards with anti-kickback attachment. -- Complete with: -- The Metal Cutting Series comes with the standard t-slot aluminum extruded top, allowing easy to attach aluminum fence, clamping systems, table surface options, as well as your own clamping jigs or cutting fixtures. These all come mounted to a extruded leveling frame for easy leveling of the entire table assembly throughout the life of the machine. -- Available Options: -- Power feed saw head; pneumatic clamping systems; Mist Coolant System (manual for non-ferrous cutting); blade.