Woodworking Equipment For Sale

Planer I/F

Panel Flipper 5 X 10

2’ Cutup SawBank

Unknown Drill Press

This turntable is in great condition. Taken out of production a month ago for upgraded. Sew-Eurodrive Motor Volts: 230/460 Hz: 60 Rpm: 1751

Planer Hurry Up Belt

Shop Built Dog Ear Machine

12" Straight Line Rip Saw, with LaserSpecifications: -- Overall table size 35-1/4"; x 59"; x 32-1/2"; H. -- Throat 14-1/2". -- Distance from front of blade to table 20-1/2". -- Max. blade dia. 12". -- Max. thickness 2-1/2".Equipped with: -- 10 HP - 1,720 RPM - 230/460 V Dual voltage blade motor. -- 5" W Pyramid corrugated feed chain, with 1 HP Motor. -- 17-3/4"; L x 1-1/2"; H Fence. -- Upper anti-kickback fingers.Complete with: -- LASIC "KML-8305 TC" 5 mW Class IIIA Temperature-Controlled Red Laser Line Projector, with Wavelength 630 - 650 nm, Max. projection distance 4 M (13'), Line length 3 - 4 m (10' - 13'), & Max. line thickness 1.5 mm (0.06").

14' Spiral Rollcase Infeed With Variable Speed Drive.

Straight Line Rip Saw

US CONCEPTS FAS 100 Arch ShaperHorizontal Arch Shaper for curved mouldings. This heavy-duty machine consistently cuts curved profiles by using a special floating feed system that registers on the outside edge of the curved blank. Specifications: -- 31" X 49" Table size, 7.5 HP main motor, 1-1/4" spindles, 6,500 RPM-Shaping, 1,600 RPM-Sanding.5" Max. cutting width, 6-1/2" max. cutter dia., 0.75 HP variable speed DC feed motor, (5) horizontal feed rolls; cast iron table. -- The FAS uses digital counters to adjust axial & cutting height adjustments accurately. This combination allows you to cut any shape moulding such as radius or ellipse and even a closed profile such as a full circle or oval. -- For added flexibility, the lower cutterhead speed offers the opportunity to sand these profiles after cutting.

US CONCEPTS CHB-16 HauncherThe CHB-16 Hauncher-Notcher is designed to notch along the edge of the board or across the end.Typical applications: Box joints, finger joints, bee boxes, hinge notches, coping, profiling in furniture and window industries, decorative cuts, beaded frame cabinets, toe kick notches, etc. Equipped with: a 40 mm horizontal spindle that moves up hydraulically past the table with the clamped material. -- A backup board in the table and climb cut ensure the clean-cut, even on cross grain. -- Material air clamps and spindle motion are actuated by a foot switch. Specifications: -- Spindle Dia. 40 mm, Spindle Length 16". (Also available in 20" capacity) supported on both ends; -- Max. Cutter Dia. 10" (254 mm); max. Cutting Depth 2-1/2" (64 mm); max. Material Stacking Height 8" (200 mm). -- Spindle Speed 4,300 or 6,200 RPM; Feed Speed (Air/Oil) 0 - 25 FPM; 15 HP motor; Dust Outlet 2 x 6" (150 mm).Complete with: -- (2) Air Clamps, Back Fence, Side Pivot stop, and Stop Bar. -- Table Size 42" x 16"; Machine Weight 1,650 Lbs (750 kG). -- OPTIONS: Electric; 20 or 25 HP motor; Additional Air Clamps; Additional Side Stop; Center Fence mounted to the Table; Horizontal Clamps; Extended Stop Bar. -- Other Options: Fixture for 45° Cut (Mitered cabinet Doors or Stretcher Bars).

US CONCEPTS CRD-300, ...CNC Handrail Borer. Fully Automatic Model CSR-300.CNC Drill used for drilling of handrails and plates (optional) is designed to operate with speed, precision, and minimal setup time.No CNC experience is needed. All the operator has to do is enter the distance of the 1st hole to the end of rail, baluster spacing, number of holes, rake angle, insert rail (or plate), and press the Start button. -- As the machine takes over, the high-speed router motor drills the hole with plunging bit and Servo-actuator advances material until all holes are finished. -- It takes roughly (3) Sec. per hole in level or rake rail. Factory developed technology for your benefit.Standard Features & Specifications: -- Heavy Duty fabricated construction -- PLC Control with Touch-Screen input -- Automatic board advance every cycle -- 3 HP Router motor with 18,000 RPM max. speed; ER25 router bit collet (1 supplied) -- 2-3/4" Max. handrail width; 2-3/8" handrail height; Colonial 6010 standard handrail -- 2" - 16" Programmable distance to the end to 1st baluster; 2" - 6-1/2" baluster spacing -- 0° - 45° Rake AngleDimensionsOptions & Additional Features: -- 5 HP Router motor, please add ...$ 560. -- Plate drilling option (6"; to 8"; x 3/4";), add ...$ 3,240. -- Hood covering the work area, add ...$ 2,120. -- Programmable distance from end to 1st hole more than 18";, RFQ. -- Other Rail style or size, RFQ. -- ER25 Collet, add ...$ 36 -- Factory Setup and training, add ...$ 800/Day + Expenses. -- Crating, add $ 360. -- Export crating as per ISPM-15, add ...$ 1,280.The CRS-300 Automatic Handrail Drilling Machine makes a huge impact in day to day operation of stair building; cost of mistakes are down, shop labor is decreased, and productivity & quality goes up significantly.

US CONCEPTS FAS-COBRA Handrail Router with 90° tilt and auto feed. Can handle the squaring and dimensioning of the laminated glue-ups, as well as profile shaping of the spiral, curved and straight handrails. Designed to use corrugated back profile knives in a 100 mm dia. head. -- Capacity/Drive: 5" Max. handrail height, 4" max. handrail width, 6-1/2" max. cutter diameter; powered by 7.5 HP spindle motor at 6,200 RPM; spindle has 1-1/4" diameter. -- Standard equipment includes: Automatic starter with motor overload protection; variable feed speed controller; (2) 0.5 HP SUMITOMO Cycloidal gearmotors; 0 - 30 FPM variable speed feed. 2-axis adjustment; cast iron dovetail slides; spindle tilts to 90°; cutterhead guard and UL/CSA electrics. -- Handrails are machined laying on their side. The horizontal cutterhead with profile knives shapes the inside edge first from the top and the outside edge from underneath. -- Vertical spindle position can be used for squaring of the glued edge (bottom of the handrail) with straight knife or squaring and grooving with profile knives. -- Options available: Dynamic braking, Electronic scale for up/down adjustments. Electronic scale for in/out adjustment, Motorized up/down adjustment, Export crating, Please call for current prices.

US CONCEPTS CSR-750 CNC Stair Router/Trencher. -- Specifications: -- Electrical 208V, 230V 45A or 460V 25A, 575V (TBA), 3-phase -- Max material width 14" -- Material thickness: ¾" - 3-1/2" -- Tool shank capacity ¾" -- Max. feed speed 300 FPM -- Communication ports: RS232, USB, network -- Machine dimensions 64"W X 92"L X 72"H -- Weight approx. 4300 lbs -- Dust outlet 8" -- Collets (2) ½" ID & (2) - ¾" ID -- Set of Dove-Tail Router Bits (1) RH & (1) LH --OEM Warranty. - Fifteen (15) months following the date of shipment,or twelve (12) months from the date the Products has completed mechanical start up,whichever is first. --Options (subject to change): -- Interior Fluorescent Light; Standard crating; Export crating as per ISPM-15; Factory Setup & Training,

US - CONCEPTS - FAS 100, ... Arch Moulding ShaperSpecifications: -- Table size: 28" x 46" x 34" H . -- Spindle dia.: 1-1/4". -- Spindle speed: 6,500 RPM. -- Max. cutting width: 4"; max. cutter dia.: 6-1/2".Equipped with & Features: -- 7.5 HP Spindle motor, 0.5 HP variable speed DC feed motor. -- Mobile base with (4) Swivel casters.Dimensions: 50" x 32" x 60" H.

Universal arch moulder, equipped with two (2) axis spindle adjustment and spindle tilt in order to easily and accurately match the cutter to the moulding profile. -- The spindle adjustment and floating feed make cutting circular, elliptical, and straight casing and crowns a breeze. -- The Floating feed system is user friendly and easy to set up. -- The Spindle can be adjusted from Horizontal to 52° to insure the proper cut on the parts you need!

US CONCEPTS FAS-HD "Arch Type" Shaper;Specifications: -- Universal arch moulder, equipped with two (2) axis spindle adjustment and spindle tilt in order to easily and accurately match the cutter to the moulding profile. -- The spindle adjustment and floating feed make cutting circular, elliptical, and straight casing and crowns a breeze.

US CONCEPTS CHB 12 HauncherThe CHB-12 Hauncher-Notcher is designed to notch along the edge of the board or across the end.Typical applications: Box joints, finger joints, bee boxes, hinge notches, coping, profiling in furniture and window industries, decorative cuts, beaded frame cabinets, toe kick notches, etc. Equipped with: a 40 mm horizontal spindle that moves up hydraulically past the table with the clamped material. -- A backup board in the table and climb cut ensure the clean-cut, even on cross grain. -- Material air clamps and spindle motion are actuated by a foot switch. Specifications: -- Spindle Dia. 40 mm, Spindle Length 12". (Also available in 16" & 20" capacities) supported on both ends; -- Max. Cutter Dia. 10" (254 mm); max. Cutting Depth 2-1/2" (64 mm); max. Material Stacking Height 8" (200 mm). -- Spindle Speed 4,300 or 6,200 RPM; Feed Speed (Air/Oil) 0 - 25 FPM; 15 HP motor; Dust Outlet 2 x 6" (150 mm).Complete with: -- (2) Air Clamps, Back Fence, Side Pivot stop, and Stop Bar. -- Table Size 36" x 16"; Machine Weight 1,650 Lbs (750 kG). -- OPTIONS: Electric; 20 or 25 HP motor; Additional Air Clamps; Additional Side Stop; Center Fence mounted to the Table; Horizontal Clamps; Extended Stop Bar. -- Other Options: Fixture for 45° Cut (Mitered cabinet Doors or Stretcher Bars).

75 HP 550 Volt 3 phase